Print this Page

Fasson® 2 Mil Clear BOPP TC/S4900/40#SCK
Spec# 74523-OBSOLETE 3/2021
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:

N/A


Caliper:

0.0020 inches ± 10%


Tensile:

MD 14,000 psi
CD 32,000 psi


Tear:

N/A


Stiffness:

N/A

Adhesive:
Fasson® S4900 is a clear, general purpose permanent acrylic adhesive with good initial tack and ultimate adhesion to a wide variety of substrates. Designed exclusively for industrial labeling applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.




Type:

Emulsion Acrylic


Minimum Application Temperature:

+25° F


Service Temperature Range:

-40° F to + 200° F subject to facestock limitations


Typical Performance Data:



Stainless Steel
Loop Tack:
Peel Adhesion:


2.8 lbs
3.2


Glass
Loop Tack:
Peel Adhesion:


N/A
3.9


Polypropylene
Loop Tack:
Peel Adhesion:


N/A
2.5


PVC
Loop Tack:
Peel Adhesion:


N/A
3.9


HDPE
Loop Tack:
Peel Adhesion:


N/A
2.0

Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:

39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:

0.00236 inches ± 10%


Tensile:

MD 38.30# per inch width
CD 14.80# per inch width


Tear:

MD 32.60 grams
CD 40.80 grams

Total Construction Caliper (approximate): 0.0052 inches ± 10%

Printing/Converting
This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. Since the facestock is transparent to most thermal transfer printer sensors, it will be necessary to use register holes between labels or back print the liner with register marks.

Applications and Uses
This product is supplied with an adhesive suitable for moderately, textured or overdyed cotton fabric apparel. However, since not all fabrics and dyes react the same, we strongly recommend testing and scale-up trials on the actual garments intended to insure proper function.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511