Print this Page
Fasson® 4 Mil NTC ("Non-Topcoated") White Flexible Vinyl/S475/65#MF
Spec# 86272
Facestock:
Fasson® 4 Mil White Flexible Vinyl is available in either topcoated or non-topcoated form. It is pliable, has good tear strength and weather resistance, but relatively low heat resistance. Care must be taken in adhesive selection to ensure good dimensional stability. UVTC not recommended for process printing by rotary letterpress.



Basis Weight:
N/A


Caliper:
0.0034 inches ± 10%


Tensile:
MD 3,500 PSI
CD 3,000 PSI


Tear:
N/A


Stiffness:
MD 30 mg

Adhesive:
Fasson® S475 is a clear adhesive offering high initial tack and cold temperature properties when applied to most packaging films. Features good UV resistance for outdoor use.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to +176° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.3 lbs
2.2 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
6.5 lbs


Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
5.6 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.4 lbs


HDPE
Loop Tack:
Peel Adhesion:

N/A
1.4 lbs

Liner:
65#MF is a bleached, coated-two-side liner. Suitable for diecutting and stripping at moderate press speeds. This product is used primarily for sheeted applications where dimensional stability and layflat are essential.



Basis Weight:
65# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0043 inches ±10%


Tensile:
N/A


Tear:
N/A

Total Construction Caliper (approximate): 0.0084 inches ± 10%

Printing/Converting
Specially formulated inks for non-topcoated vinyls are required. This product can be diecut and stripped at high speeds on standard web-fed presses.

Applications and Uses
Applied labels will be resistant to water, mild acids, bases, salts, and most petroleum based oils, greases, and aliphatic solvents. This product will provide satisfactory outdoor durability for two years under normal vertical exposure conditions. Proper inks should be chosen and labels overlaminated to insure durability of graphics. This construction complies with CONEG heavy metal content regulations.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511