Print this Page
Fasson® 3Mil DT BOPP/AT2550/40#SCK
Spec# B2866
Facestock:
Fasson® 3.0 Mil Direct-Therm BOPP is a white polypropylene-base coated film with a medium-sensitivity thermal layer. Offering exceptional direct thermal imaging, it is suitable for use in both semi-automatic and hand-applied labeling applications.



Basis Weight:
n/a


Caliper:
0.0030 inches +/- 10%


Tensile:
MD 11,000 psi
CD 23,000 psi


Tear:
MD 23 grams per sheet
CD 18 grams per sheet


Stiffness:
MD 27 mg
CD 43 mg

Adhesive:
Fasson® AT2550 is an all-temperature adhesive designed to provide good room temperature performance, excellent cold temperature performance, and cleaner converting, without sacrificing good diecutting and stripping properties. Because of its cold temperature properties and good adhesion to corrugated cardboard, AT2550 is an ideal adhesive for warehouse applications. AT2550 is also repulpable; this means it is fully recyclable and enables full recyclability of the end packaging.

Fasson® AT2550 adhesive meets the requirements of FDA CFR 175.105 for indirect food contact.  Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F (-29° C)


Service Temperature Range:
-65° F to +200° F


Typical Performance Data: Tested with 54# Semi-Gloss facesheet at room temperature on standard lab panels.



Stainless steel
Loop Tack:
Peel Adhesion:

1.9 - 2.7 lbs
2.9 - 3.7 lbs


HDPE (NT)
Loop Tack:
Peel Adhesion:

1.3 - 2.1 lbs
0.6 - 1.4 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

1.5 - 2.3 lbs
0.8 - 1.6 lbs


Recycled corrugated
Loop Tack:
Peel Adhesion:

0.7 - 1.5 lbs
1.0 - 1.8 lbs


Glass
Loop Tack:
Peel Adhesion:

2.0 - 2.8 lbs
1.9 - 2.7 lbs

Liner:
Fasson® 40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.



Basis Weight:
41.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0024 inches ±10%


Tensile:
MD 40# per inch width
CD 19# per inch width


Tear:
MD 35 grams
CD 40 grams

Total Construction Caliper (approximate): 0.00620 inches +/- 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511