Print this Page
Fasson® TransCode® Clear II/S4900/50# Brown SCK
Spec# 74083
Facestock:
Fasson® TransCode® Clear II is a corona treated 2.5 mil matte clear polyolefin film which offers exceptional thermal transfer and rotary press printability.



Basis Weight:
N/A


Caliper:
0.0025 inches ± 10%


Tensile:
MD 160,000 psi
CD 60,000 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® S4900 is a clear, general purpose permanent acrylic adhesive with good initial tack and ultimate adhesion to a wide variety of substrates. Designed exclusively for industrial labeling applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to + 200° F subject to facestock limitations


Typical Performance Data:



Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.2


Glass
Loop Tack:
Peel Adhesion:

N/A
3.9


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.5


PVC
Loop Tack:
Peel Adhesion:

N/A
3.9


HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0

Liner:
Fasson® 50# Brown SCK is a super calendered brown kraft stock with excellent roll label converting characteristics. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
53.3# per ream
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 45# per inch width
CD 24# per inch width


Tear:
MD 48 grams
CD 58 grams

Total Construction Caliper (approximate): 0.0065 inches ± 10%

Printing/Converting
In-house testing is always recommended prior to final ink or ribbon selection. This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. Since the facestock is transparent to most thermal transfer printer sensors, it will be necessary to use register holes between labels, or back print the liner with register marks.

Applications and Uses
This product is supplied with an adhesive suitable for moderately, textured or overdyed cotton fabric apparel. However, since not all fabrics and dyes react the same way, we strongly recommend testing and scale-up trials on the actual garments intended to insure proper function.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511