Print this Page
Fasson® TransCode® White II/S4900/50#SCK
Spec# 74087 - Restricted to hand application
Facestock:
Fasson® TransCode® White II is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Printable by screen, UV letterpress, UV solvent, and water-based flexographic inks, thermal transfer resin-based or wax/resin combination ribbons. In-house testing is always recommended prior to final ink or ribbon selection. This facestock is opaque to most thermal transfer printer sensors. However, older model printers might not sense it, and it might be necessary to use registration holes between labels or backprint the liner with registration marks. Testing in the printer is highly recommended prior to entering production commitments. This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. Suitable for indoor or outdoor use.



Basis Weight:
n/a


Caliper:
0.0025 inches ± 10%


Tensile:
MD 17,500 psi
CD 2,400 psi


Tear:
MD 9 grams
CD 107 grams


Stiffness:
MD 20 mg

Adhesive:
Fasson® S4900 is a clear, general purpose permanent acrylic adhesive with good initial tack and ultimate adhesion to a wide variety of substrates. Designed exclusively for industrial labeling applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to + 200° F subject to facestock limitations


Typical Performance Data:



Stainless Steel
Loop Tack:
Peel Adhesion:

2.8 lbs
3.2


Glass
Loop Tack:
Peel Adhesion:

N/A
3.9


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.5


PVC
Loop Tack:
Peel Adhesion:

N/A
3.9


HDPE
Loop Tack:
Peel Adhesion:

N/A
2.0

Liner:
50#SCK is a bleached, super calendered paper stock with very good diecutting and matrix stripping properties. Used for standard roll-to-roll and fanfolded applications. For best results, fanfolded products must be processed in a controlled environment of 40-50% RH. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
53.1# per ream ±10%
(24"x36" sheets)


Caliper:
0.0032 inches ± 10%


Tensile:
MD 44# per inch width
CD 22# per inch width


Tear:
MD 54 grams
CD 59 grams

Total Construction Caliper (approximate): 0.0065 inches ± 10%

NOTE: This specification is restricted to hand-applied labels only; it is not suitable for automatic application.

Printing/Converting
Printable by many web screen, UV letterpress, flexographic solvent and water based inks, thermal transfer resin based or wax/resin combination ribbons. In-house testing is always recommended prior to final ink or ribbon selection. This product can be diecut and stripped at high speeds on standard web-fed presses using tooling specifically designed for this construction. This product is not recommended for automatic labeling applications. This facestock is opaque to most thermal transfer printer sensors. However, older printer models might not sense it, and it might be necessary to use registration holes between labels or back print the liner with register marks. Testing in the printer is highly recommended prior to entering production commitments.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511