Print this Page
Fasson® TransCode® Clear II/S4600/50# Brown SCK
Spec# 74106
Facestock:
Fasson® TransCode® Clear II is a corona treated 2.5 mil matte clear polyolefin film which offers exceptional thermal transfer and rotary press printability.



Basis Weight:
N/A


Caliper:
0.0025 inches ± 10%


Tensile:
MD 160,000 psi
CD 60,000 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® S4600 is a clear general purpose permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to + 300° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.77 lbs
4.1 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
4.4 lbs


Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

N/A
4.3 lbs


HDPE
Loop Tack:
Peel Adhesion:

N/A
4.6 lbs

Liner:
Fasson® 50# Brown SCK is a super calendered brown kraft stock with excellent roll label converting characteristics. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
53.3# per ream
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 45# per inch width
CD 24# per inch width


Tear:
MD 48 grams
CD 58 grams

Total Construction Caliper (approximate): 0.0066 inches ± 10%

Printing/Converting
Printable by many web screen, UV letterpress, flexographic solvent and water based inks, thermal transfer resin or wax/resin ribbons. Testing is always recommended. This product can be diecut stripped at high speeds on standard web-fed presses using tooling specifically designed for construction. This product is not recommended for automatic labeling applications. Due to the facestock's transparency to most thermal transfer printer sensors, it is necessary to either use registration holes between labels, or back print the liner with registration marks.

Applications and Uses
This product is supplied with an adhesive suitable for moderately textured and wrinkle-resistant fabrics. There have been no known cases of fabric staining, distortion, or noticeable permanent mark when removed from fabric. However, since not all fabrics and dyes react in the same way, we strongly recommend testing and scale-up trials on the actual intended garments to insure proper function.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511