Print this Page

þ - Mandatory fields
Fasson® S727 is a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces. Fasson® S727 has excellent holding power, which helps prevent edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S727 provides excellent diecutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used.
Adhesive # S727


Type: Solvent Acrylic

Substrate
Loop Tack
Peel Adhesion
Stainless Steel2.5 lbs2.6 lbs-tear
Treated HDPE2.4 lbs2.6 lbs-tear
Polypropylene2.1 lbs1.5-1.8 lbs
Recycled Corrugated1.9 lbs1.1-1.3 lbs-Pulled Fiber
Glass2.9 lbs2.6 lbs-tear
Minimum Application Temperature:+50° F 10° C

Service Temperature Range: -65° F to +250° F

Face:
60# C1S Paper at room temperature on standard lab panels

FDA Compliance:
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Typical Shear:
Coat Weight:







Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

Print this Page



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511