Print this Page
Fasson® 2 Mil Clear BOPP UVIJ/S7000/1.2 Mil Polyester
Spec# 79628
Facestock:
Fasson® 2 Mil Clear BOPP UVIJ is a topcoated, biaxially oriented, co-extruded polypropylene film with excellent clarity. This product has excellent moisture resistance and good diecutting and dispensing characteristics. The surface has been topcoated to provide superior printability by UV Inkjet, UV letterpress, flexographic UV, solvent and water-based inks.  Not recommended for thermal transfer printing. The surface has been modified to provide improved ink adhesion. Use caution when applying inks out to the edge of the label, particularly UV cured inks and varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. 

NOTE: In-house testing is always recommended prior to final ink selection. Qualification is subjective evaluation and customer perception may differ. As label designs vary, we encourage end application testing of all materials.



Basis Weight:
n/a


Caliper:
0.0020 inches ± 10%


Tensile:
MD 20,580 psi
CD 39,750 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S7000 is a clear, general purpose permanent acrylic adhesive. It exhibits a balance of release properties to enable high speed converting and dispensing on increasingly-thinner substrates. Adhesion performance is designed for low surface energy substrates, enabling lasting performance on rigid and squeezable containers. It has been specifically designed to exhibit excellent wet-out characteristics and water-whitening resistance.

FDA compliance: Fasson® S7000 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
25° F


Service Temperature Range:
-40° F to +175° F, subject to facestock limitations
Typical Performance Data: Tested with 2 mil clear polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

Target 1.3 lbs.
Target 1.3 lbs.

PET
Loop Tack:
Peel Adhesion:

Target 3.5 lbs.
Target 2.0 lbs.

Glass
Loop Tack:
Peel Adhesion:

Target 2.6 lbs.
Target 1.8 lbs.

Polypropylene
Loop Tack:
Peel Adhesion:

Target 1.4 lbs.
Target 1.5 lbs.





Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00398 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511