Print this Page
Fasson® 2 Mil Clear BOPP TC/S517N/1 Mil Polyester
Spec#
77116 - DO NOT USE TC1000
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, biaxially-oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks. Not recommended for thermal transfer printing.
Use caution when applying inks to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.
Basis Weight:
N/A
Caliper:
0.00197 inches ± 10%
Tensile:
MD 20,580 psi
CD 39,250 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® S517N is a super-clear, solvent acrylic, permanent adhesive. It provides high initial tack, high shear, minimal cold flow, and ultimate adhesion to a wide variety of substrates, including glass. Designed to withstand pasteurization. Meets the following FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Type:
Solvent Acrylic
Minimum Application Temperature:
+45° F
Service Temperature Range:
-40° F to +300° F, subject to facestock limitations.
Typical Performance Data:
2 Mil Clear Polyester at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
2.1 lbs
4.2 lbs
Glass
Loop Tack:
Peel Adhesion:
N/A
2.7 lbs
LDPE
Loop Tack:
Peel Adhesion:
N/A
0.9 lbs
HDPE
Loop Tack:
Peel Adhesion:
N/A
0.7 lbs
Polypropylene
Loop Tack:
Peel Adhesion:
N/A
1.7 lbs
Liner:
A 1 mil durable polyester liner suitable for high speed diecutting and stripping applications. Used primarily for roll-to-roll applications.
Basis Weight:
N/A
Caliper:
0.00106 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
N/A
Total Construction Caliper
(approximate):
0.00383 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511