DURABLE PORTFOLIO
Product Data Sheet
2 Mil White Laser TC Polyester/S4600/66#PK
Spec#: 54162 DURABLE
FacestockFacestock physical properties
Fasson® 2 Mil Matte White Topcoated Polyester is a white film facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, abrasion and chemical resistance. Matte topcoat is designed to offer excellent laser printability.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0023
inches
58.42
micron
Tensile:
ASTM D882
MD
21,000
psi
1,476
kg/sq.cm
CD
23,000
psi
1,617
kg/sq.cm
AdhesiveAdhesive physical properties
S4600 is a clear general purpose emulsion permanent adhesive featuring good initial tack and ultimate adhesion to a wide variety of substrates.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0008
inches
20.32
microns
Standard Coat Wt:
23
g/sq m
Minimum Appl Temp:
10
F
-12
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
44.0
oz/inch
48.4
N/100 mm
LinerLiner physical properties
Fasson® 66# Polycoated liner with backside printability. Used for roll-to-sheet applications, including laser.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0047
inches
119.3800
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
66.0
lbs
0.0
g/sq m
Tensile:
ASTM D882
MD
100.0
N/15mm
CD
65.0
N/15mm
Tear:
TAPPI T414
MD
650.0
mN
0.0
CD
650.0
mN
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
120
.0078 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
- Durable 2 mil white PET
- Good tear strength

- 66# PK liner is back coated for printability and static reduction for improved feed


Applications and Uses
This product has passed British Standard 5609 (BS 5609:1986) Section 2 and Section 3 testing, which is necessary for

International Maritime Dangerous Goods (IMDG) certification


Printing and Converting
The topcoat on this product is suitable for toner printers, but testing is recommended to ensure satisfactory toner anchorage. To maximize on-press efficiencies when converting Fasson® laser film product constructions, material should be run with Grain Direction (machine direction) perpendicular to the Feed Direction of laser printing. For a comprehensive list of recommendations for laser products, please read this set of on-line converting tips before purchasing this product: http://label.averydennison.com/content/dam/averydennison/lpm/na/en/product%20families/Rapid-Roll/fasson%20rapid-roll%20laser%20tag/Laser%20Inkjet%20Landing%20Page/LaserInkJet-printingtips.pdf

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition: UL
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. on Polyproylene Labels
-9
-23
140
60
I
Recognized Ribbons:





409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511