Print this Page
Fasson® 60# Estate Label® #17 Martele WS/S100R/1.2 Mil Polyester
Spec#
53957 -REV 10/2018L
Facestock:
Fasson® 60# Estate Label® #17 Martele WS is an ultra-bright Titanium white paper which features a Martele textured finish and wet-strength additive, which increases resistance to tearing and shriveling in moist environments. Among the brightest white facestocks available today, it is an ideal print surface for wine, high-end beverages, and gourmet foods.
The Estate Label® papers perform extremely well on high-speed presses and labeling lines and easily accepts offset and flexographic printing as well as specialty techniques such as engraving, embossing, foil stamping and die cutting.
Qualification is a subjective evaluation, and customer perception might differ. As label designs vary, we encourage end-use application testing of all materials.
Basis Weight:
60# per ream
(500 sheets 25" x 38")
Caliper:
0.0050 inches ± 10%
Tensile:
MD 15# per inch width
CD 8# per inch width
Tear:
MD 48 grams per sheet
CD 51 grams per sheet
Stiffness:
n/a
Adhesive:
Fasson® S100R is a permanent adhesive which is removable in minimum 100° F water. Developed with good initial tack and ultimate adhesion, S100R can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100° F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, or as long as 5 minutes. Where removal is required, this adhesive is recommended for use on HDPE, polypropylene, poly vinyl chloride (PVC), polyester, Lexan®, stainless steel, and glass. We do not recommend it for use with film facestocks (i.e., polypropylene, polystyrene), due to a potential surface interaction which could cause the loss of water removability. This adhesive exhibits excellent diecutting and stripping properties.
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Lexan® is a registered trademark of General Electric Company.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+20° F
Service Temperature Range:
-65° F to 200° F
Typical Performance Data:
60# C1S Paper at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
2.6 lbs
1.8 lbs - Tear
HDPE
Loop Tack:
Peel Adhesion:
1.6 lbs
1.1 - 1.6 lbs
PET
Loop Tack:
Peel Adhesion:
2.6 lbs
1.2 lbs -Tear
Glass
Loop Tack:
Peel Adhesion:
2.7 lbs
1.9 lbs -Tear
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00696 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511