DURABLE PORTFOLIO
Product Data Sheet
Fasson® TransCode®/S475/50#SCK
Spec#: 72197 Durable
FacestockFacestock physical properties
4 mil white mono-oriented polyolefin film with high opacity, excellent cross directional tear resistance, and a thermal transfer and press printable surface. Corona Treated for improved ink anchorage.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0040
inches
101.60
microns
Tensile:
ASTM D882
MD
20,000
PSI
1,406
kg/sq. cm
CD
3,000
PSI
211
kg/sq. cm
AdhesiveAdhesive physical properties
Fasson® S475 is a clear acrylic adhesive offering high initial tack and cold temperature properties when applied to most packaging films. Features good UV resistance for outdoor use.
Imperial Value
Units
Metric Value
Units
Type:
Caliper:
ASTM D1000
0.0006
inches
0.00
Standard Coat Wt:
23
g/sq m
Minimum Appl Temp:
10
F
-12
C
Service Temp Range:
Min
-40
F
-40
C
Max
176
F
80
C
Loop Tack Stainless
Steel: PSTC11
2.3
lb/in
0.0
LinerLiner physical properties
50# SCK is a bleached, super calendered paper stock with very good die-cutting and matrix stripping properties. Used for standard roll-to-roll applications. Not recommended for sheeting.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
54.5
lbs/ream
87.2
g/sq m
Tensile:
ASTM D882
MD
48.0
lbs/inch
211.2
N/25 mm
CD
26.0
lbs/inch
114.4
N/25 mm
Tear:
TAPPI T414
MD
1.8
ounces
51.1
grams
CD
2.1
ounces
59.6
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
30
0.0080 inches ± 10%

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons.
Suitable for indoor or outdoor use.
BS5609 Section 2 and 3 certified.
UL969 recognized under MH17205
UL969 Yellow Card link: https://iq.ul.com/ul/cert.aspx?ULID=100076144
Compliant with GHS standards



Applications and Uses
This product can be diecut and stripped at high speeds on standard web-fed presses.

Printing and Converting
Thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. This product can be diecut and stripped at high speeds on standard web-fed presses.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition: UL, CSA
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. ABS Plastic

    3. Alkyd Enamel Paint

    4. Aluminum

    5. Epoxy Paint

    6. Galvanized Steel

    7. Polycarbonate

    8. Polyester Paint

    9. Polyethylene

    10. Polypropylene

    11. Porcelain

    12. Stainless Steel
-40

-40

-40

-40

-40

-40

-40

-40

32

32

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

0

0

-40

-40
176

176

176

176

176

176

176

176

176

176

176

176
80

80

80

80

80

80

80

80

80

80

80

80
I

I

I

I

I

I

I

I

I

I

I

I
Recognized Ribbons: Astro Med Inc "R-5", Iimak "P2", Iimak "Primemark", Zebra "5095", Zebra "5175", Zebra "5555", and others.

Canadian Standards Association
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only
I/O=Indoor & Outdoor)
    1. Metals

    2. Plastics Group I

    3. Plastics Group II

    4. Plastics Group III

    5. Plastics Group V

    6. Plastics Group VI

    7. Plastics Group VII

    8. Plastics Group VIII
0

0

0

0

0

0

0

0















176

176

176

176

176

176

176

176
80

80

80

80

80

80

80

80
I

I

I

I

I

I

I

I
Acceptable Ribbons:




409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511