Print this Page
Fasson® Direct-Therm 330HD FSC®/S4750/40#CK
Spec# 53599 OBSOLETE
Facestock:
Fasson® Direct-Therm 330HD FSC® is a smooth, bright white paper with a high sensitivity thermal coating. Direct-Therm 330HD is designed for robust resistance to a variety of contaminates, while also offering a highly sensitive thermal chemistry. This product is intended for those applications requiring high print speeds or low printer energy.

The FSC® certification ensures that products come from well-managed forests which provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified materials are identified or kept segregated from non-certified or non-controlled materials through this chain.



Basis Weight:
46# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00310 inches +/- 10%


Tensile:
MD 26# per inch width
CD 14# per inch width


Tear:
MD 28 grams
CD 36 grams


Stiffness:

Adhesive:
Fasson® S4750 is a general purpose acrylic adhesive featuring high adhesion and good mandrel hold to small diameter substrates. Fasson® S4750 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: Trans-Therm 1C Paper


Treated HDPE
Loop Tack:
Peel Adhesion:

2.46 lbs
1.27 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

2.59 lbs
1.91 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.25 lbs
0.9 lbs - Pulled Fiber

Glass
Loop Tack:
Peel Adhesion:

3.91 lbs
1.96 lbs





Liner:
40#CK liner is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.1# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0024 inches ± 10% target


Tensile:
MD 35.6# per inch width target
CD 13.9# per inch width target


Tear:
MD 34.3 grams target
CD 44.7 grams target
Total Construction Caliper (approximate): 0.00637 ± 10%

Applications and Uses
Fasson highly recommends material to be imaged and used within three to six months (FIFO inventory method) upon receipt of material for the finest quality product.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511