Print this Page
Fasson® FasClear® 350/S727/40#BG
Spec# 79066
Facestock:
Fasson® FasClear® 350 is a corona-treated, flexible matte clear polyolefin film with exceptional dimensional stability. Printable by web screen, UV letterpress, flexo solvent, and water-based inks. Use of in-line corona treatment will greatly expand the number of inks which can be used. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.

This product can be diecut and stripped at high speeds on standard web-fed presses using typical film tooling. Excellent dispensability with direct comparison to clear Opticite*, and better performance over clear MDPE and clear flexible vinyl.

NOTE: Opticite* is a trademark of The Dow Chemical Company.



Basis Weight:
n/a


Caliper:
0.0035 inches ± 10%


Tensile:
MD 17,500 psi
CD 3,000 psi


Tear:
MD 15 grams
CD 200 grams


Stiffness:
n/a
Adhesive:
Fasson® S727 is a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces. Fasson® S727 has excellent holding power, which helps prevent edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S727 provides excellent diecutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-65° F to +250° F
Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.5 lbs
2.6 lbs-tear

Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
2.6 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

2.1 lbs
1.5-1.8 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs
1.1-1.3 lbs-Pulled Fiber

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
2.6 lbs-tear
Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
39.30# per ream
(500 sheets 24" x 36"


Caliper:
0.00225 inches ± 10%


Tensile:
n/a


Tear:
n/a
Total Construction Caliper (approximate): 0.00655 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511