Print this Page
Fasson® Pli-A-Print®/FDA815SB/40#SCK ABC
Spec# 02730
Facestock:
Fasson® Pli-A-Print® is a latex impregnated, clay coated paper. High internal strength and moisture resistance. Good conformability and flexibility. Fair printability with solvent/water-based flexo, screen, and offset. Not recommended with UV ink systems, letterpress printing, or imprinting.



Basis Weight:
59# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 20# per inch width
CD 15# per inch width


Tear:
MD 48 grams per sheet
CD 50 grams per sheet


Stiffness:
MD 50 mg
CD 25 mg
Adhesive:
Fasson® FDA815S is a clear adhesive featuring good initial tack, moderate shear, minimum cold flow, and the ability to adhere to a wide variety of substrates.

FDA Compliance:
- Meets the requirements of 16CFR 1500.41 for direct skin contact.
- Meets the requirements of Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: Tested with 2 Mil Clear Polyester at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

1.6 lbs
3.8 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.1 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
1.0 lbs

ABS Plastic
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs
Liner:
40#SCK is a bleached, super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications. Supplied with ABC ("anti-block coating") on the backside of the liner to control adhesive and label transfer to the backside of the liner in finished, wound rolls. Backside printable with many water-based flexo inks.



Basis Weight:
39.9# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.3# per inch width
CD 14.8# per inch width


Tear:
MD 32.6 grams
CD 40.8 grams
Total Construction Caliper (approximate): 0.00636 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511