Print this Page
Fasson® 1.6 Mil Metallized BOPP TC/S7400/.92 Mil Polyester
Spec#
78928 - OBSOLETE 4/2023
REV 1/2021F
Facestock:
Fasson® 1.6 Mil Metallized BOPP TC is a topcoated, biaxially oriented polypropylene which provides mirror-like reflectivity. This product can be diecut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended to have dies tooled specifically for this construction. This product offers excellent dispensing characteristics.
Printable by web screen, UV letterpress, and flexographic. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.
Basis Weight:
N/A
Caliper:
0.00160 inches +/- 10%
Tensile:
MD 16,000 psi
CD 37,000 psi
Tear:
Stiffness:
Adhesive:
Fasson® S7400 is a clear, permanent acrylic adhesive designed specifically for prime film beer and beverage label applications which require resistance to water. It is engineered to be applied in moist environments typically found in brewery (beer) applications. Maintains clarity even with extended exposure to ice water after the label has been applied to a dry surface. This adhesive offers improved release for both matrix stripping and dispensing. It also has excellent wetout characteristics. Not recommended for textured and/or low surface energy (HDPE) surfaces.
Fasson® S7400 adhesive compositionally complies with FDA Title 21 Code of Federal Regulations (C.F.R.) Section 175.105 ("Adhesives") indirect food contact.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+25° F
Service Temperature Range:
-40° F to +176° F (upper service temperature is facestock limitation for Clear BOPP)
Typical Performance Data:
Stainless Steel
Loop Tack:
Peel Adhesion:
1.8 lb/in
2.5 lb/in
PET
Loop Tack:
Peel Adhesion:
3.0 lb/in
1.5 lb/in
Glass
Loop Tack:
Peel Adhesion:
1.4 lb/in
1.2 lb/in
Liner:
A 0.92 mil clear polyester liner which is designed primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00092 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00334 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511