Print this Page
Fasson® 2.3 Mil White BOPP TC/R1490/1.2 Mil Polyester
Spec#
79008
Facestock:
Fasson® 2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by UV and water-based flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.
Basis Weight:
N/A
Caliper:
0.0023 inches ± 10%
Tensile:
MD 26,825 psi
CD 22,475 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® R1490 is a specially formulated low-odor acrylic adhesive with clean removability properties, and a smooth, low-noise peel. Meets the requirements of FDA Food Contact Notification (FCN)1716 for "Direct Food compliance." R1490 adhesive, for use at a coat weight of up to 23 g/m2, may be used in contact with all food types under FDA’s "Conditions of Use C (“hot filled or pasteurized above 150°F”) through H (“frozen or refrigerated storage: ready-prepared foods intended to be re-heated in container at time of use”)," except for use in contact with infant formula and human milk, which was not included as part of the FCN.
Type:
Solvent Acrylic
Minimum Application Temperature:
+50° F
Service Temperature Range:
-40° F to + 250° F
Typical Performance Data:
2.0 mil Clear BOPP at room temperature on standard lab panels, unless otherwise noted.
Stainless steel
Loop Tack:
Peel Adhesion:
0.9 lbs.
1.1 lbs.
PET flow wrap
Loop Tack:
Peel Adhesion:
1.1 lbs.
1.5 lbs.
Liner:
A 1.2 mil durable polyester liner suitable for high-speed, roll-to-roll diecutting, stripping, and label dispensing. Its ultra-smooth surface enhances adhesive wet-out.
Basis Weight:
Caliper:
0.00118 inches ± 5%
Tensile:
MD 27,000 psii
CD 27,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.0043 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511