Print this Page
Fasson® Semi-Gloss EliteTM FasCoverTM 2/AT20/40#SCK (Black)
Spec# 15477-REV 9/2020F
Facestock:
Fasson® Semi-Gloss Elite™ FasCover™2 is a bright, blue-white, 58# C1S, super calendered paper with a black backside primer for use as a cover up stock. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based Flexo, UV Flexo, and UV Letterpress inks. It has improved smoothness while maintaining strength for good converting and dispensing.



Basis Weight:
58.0# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0030 inches +/- 10%


Tensile:
MD 34.60 pounds per inch
CD 16.00 pounds per inch


Tear:
MD 43.00 grams
CD 56.00 grams


Stiffness:
MD 128 mg
CD 71 mg

Adhesive:
Fasson® AT20 is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20 is an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
-20° F


Service Temperature Range:
-65° F to +200° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
2.2-3.0 lbs


Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
1.1-2.1 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

2.9 lbs
1.8-2.4 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.6 lbs
1.1-2.1 lbs; pulled fiber


Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs

Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.30# per inch width
CD 14.80# per inch width


Tear:
MD 32.60 grams
CD 40.80 grams

Total Construction Caliper (approximate): 0.00626 inches ± 10%

Applications and Uses
This adhesive is suitable for a wide variety of labeling applications where excellent print quality, label opacity and adhesive performance are critical. Fasson® AT20 has excellent cold temp properties and good adhesion to corrugated, making it an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511