DURABLE PORTFOLIO
Product Data Sheet
Fasson® 1.5 Mil White Polyester TC/S8092 INC/3 Mil Polyester
Spec#: 79438 DURABLE
FacestockFacestock physical properties
1.5 Mil White Polyester is a homogeneously pigmented white facestock featuring excellent tear strength, heat resistance, dimensional stability, opacity, and chemical resistance. The topcoat is designed to provide excellent printability.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0014
inches
35.56
micron
Tensile:
ASTM D882
MD
0
0
CD
0
0
AdhesiveAdhesive physical properties
S8092 is a permanent high coat weight silicone adhesive.
Imperial Value
Units
Metric Value
Units
Type:
S8092
Caliper:
ASTM D1000
0.0020
inches
50.80
micron
Standard Coat Wt:
50
g/sq m
Minimum Appl Temp:
5
F
-15
C
Service Temp Range:
Min
-112
F
-80
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
0.2
psi
0.0
N
LinerLiner physical properties
A 3.0 mil durable polyester liner suitable for high speed die cutting and stripping applications. Used primarily for roll-to-roll, high speed dispensing applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0030
inches
76.2000
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
114.0
g/m2
g/sq m
Tensile:
ASTM D882
MD
0.0
0.0
CD
0.0
0.0
Tear:
TAPPI T414
MD
0.0
0.0
CD
0.0
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
N/A

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
The gloss white polyester film is topcoated for excellent ink anchorage.
Used on very difficult substrates.

Applications and Uses
This product is designed for conversion into identification, warning and tracking labels.
The topcoat allows for thermal transfer printing.
Used on very difficult substrates, iincluding siliconized fabrics, PTFE and different types of rubber.


Printing and Converting
The topcoat allows for thermal transfer printing.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Compliance Recognition:






409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511