Print this Page
Fasson® 50# DSXTM FSC®/R5195/50#CK
Spec# 18329
Facestock:
Fasson® 50# DSX™ FSC® is a fifty pound bright white, high strength EDP paper specially designed for enhanced continuous laser imaging, variable imprinting and high speed converting.  Excellent smudge resistance.  Prints well offset; fair printing solvent and water-based flexo and screen.

This product is supplied with Forestry Stewardship Council® ( FSC®) certification to support your chain of custody.



Basis Weight:
50# per ream
(500 sheets 25" x 38")


Caliper:
0.0035 inches +/- 10%


Tensile:
MD 36# per inch width
CD 18# per inch width


Tear:
MD 47 grams
CD 51 grams


Stiffness:
MD 125 mg
CD 65 mg
Adhesive:
Fasson® R5195 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. Its consistent level of adhesion and long term removability make it suitable for applications on substrates such as glass, plastics, and corrugated cardboard. It has also been found to adhere well to curved glass and plastic substrates approaching 1" in diameter; however, use caution with stiff facestocks.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
-65° F to +180° F
Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.


Glass
Loop Tack:
Peel Adhesion:

1.0 lbs avg
0.9 lbs avg

Corrugated
Loop Tack:
Peel Adhesion:

0.5 lbs avg
0.6 lbs avg















Liner:
50#CK is a bleached calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
51.1# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ±10%


Tensile:
MD 45# per inch width
CD 18# per inch width


Tear:
MD 60 grams per sheet
CD 60 grams per sheet
Total Construction Caliper (approximate): 0.0075 inches ± 10%

Applications and Uses
This product is suitable for use in a wide variety of applications requiring a quality, uncoated smudge-resistant facestock and a good, general purpose removable adhesive. This product is suitable for use in most continuous feed dot matrix or line printers. Proper testing of the finished label in the final application is recommended.

Classification of not being toxic (acute/chronic), corrosive, a skin/eye irritant, or strong sensitizer as defined in the 16 CFR 1500.3(b)(5), (7) – (9) (FHSA regulations), when used as intended or under circumstances involving reasonable, foreseeable misuse, based on a Toxicological Risk Assessment of the submitted product formulation by a Diplomate of the American Board of Toxicology (DABT).

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511