Print this Page
Fasson® 119# Cherry Wood/AT20N/1.2 Mil Polyester
Spec# 53605
Facestock:
Fasson® 119# Cherry Wood is a smooth, real wood veneer label material. The smooth surface has just enough hand-feel so that you know it is real wood, but it is smooth enough to be printed and converted. Fasson® Cherry Wood is ideal for wine, spirits, craft beers, high-end beverages, and gourmet foods.

As the cherry wood is a 100% true wood material with natural grain patterns, no two labels will look the same. The wood may have natural defects, such as dark spots, cracks, general wood bruising or even a small hole. The color shade, grain pattern and caliper can vary between batches, or even within a roll. Given the nature of the material, the product has to be cut with dies adapted to it and it could generate wood dust. The cherry wood face material will carry wood separations (joints) as well as an increased number of product splices (wood + PET carrier) in a roll, due to the fact that this is a wood material. It is recommended to not expose the material to heat or moisture conditions as this will impact the material flatness.   



Basis Weight:
119# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0105 inches ± 10%


Tensile:
MD 1,304 psi
CD 4,099 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® AT20N is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold- temperature properties and good adhesion to corrugated cardboard, AT20N is an ideal adhesive for warehouse applications. Fasson® AT20N is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F -29° C


Service Temperature Range:
-65° F to +200° F


Typical Performance Data: Tested with 60# Semi-Gloss Elite™ facesheet at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
1.6-3.1 lbs


HDPE (Non-Treated)
Loop Tack:
Peel Adhesion:

1.9 lbs
0.8-1.0 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

2.2 lbs
1.4-2.1 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.8 lbs
1.0-1.4 lbs


Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs

Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A

Total Construction Caliper (approximate): 0.01248 inches ± 10%

Fasson® and all other Avery brands, product names and codes are trademarks of Avery Dennison Corporation.


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511