Print this Page
Fasson® FoodmarkTM/AT1/40#SCK
Spec# 00111 - Obsolete; see spec 15476
Facestock:
Fasson® Foodmark™ is a flexible facestock with medium gloss. This sheet was engineered with excellent wick-resistance and will withstand high moisture environments. Prints well with flexo, offset, and UV ink systems. Not recommended for letterpress, screen printing, or imprinting. Possibility of adhesive bleed to this facestock when used with R128 or FA20 adhesives.



Basis Weight:
60# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0034 inches ± 10%


Tensile:
MD 30# per inch width
CD 16# per inch width


Tear:
MD 45 grams per sheet
CD 50 grams per sheet


Stiffness:
MD 145 mg
CD 85 mg

Adhesive:
Fasson® AT1 adhesive features good diecutting and stripping characteristics. Permanent at cold and room temperatures after 24 hours. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-10° F


Service Temperature Range:
-65° F to +250° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

1.5 lbs
1.5-2.1 lbs


Treated HDPE
Loop Tack:
Peel Adhesion:

1.1 lbs
1.2-1.6 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

2.0 lbs
1.4-1.6 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.0 lbs
0.5-0.8 lbs


Glass
Loop Tack:
Peel Adhesion:

1.7 lbs
1.5-2.4 lbs

Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.30# per inch width
CD 14.80# per inch width


Tear:
MD 32.60 grams
CD 40.80 grams

Total Construction Caliper (approximate): 0.0066 inches ± 10%

Applications and Uses
This product is suitable for a wide variety of labeling applications where excellent print quality and adhesive performance are critical. Fasson® AT1 is suitable for use as an adhesive when one label is needed for freezer, refrigerator, and room temperature products. Fasson® AT1 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur. Fasson® Foodmark™ is moisture resistant and suitable for use in toy labeling applications.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511