Print this Page
Fasson® 2 Mil Rainbow OPP/S692N/40#SCK
Spec#
79016-OBSOLETE (REPLACE B5352)
Facestock:
Fasson® 2 Mil Rainbow OPP is a polypropylene film which has been embossed and metallized with a neutral holographic rainbow pattern providing a high degree of visual shelf appeal. The print side of the polypropylene film has been topcoated to promote ink lay down and adhesion. "Shim lines," which are small lines appearing in the facestock of some holographic patterns, are inherent in holographic facestocks, and should be taken into consideration when determining label layout. This product has a "softseam." A softseam repeat is an overlapped shimline, so that the visual impact is minimal and there is no absence of color, color shift, or hard line found with a conventional, hard shim line.
Basis Weight:
Caliper:
0.0020 inches +/-10%
Tensile:
Tear:
Stiffness:
Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.
Type:
Emulsion acrylic
Minimum Application Temperature:
+23° F
Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data:
2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.
HDPE
Loop Tack:
Peel Adhesion:
1.2 - 1.8 lbs
1.1 - 1.7 lbs
PET
Loop Tack:
Peel Adhesion:
3.6 - 4.2 lbs
2.6 - 3.2 lbs
Glass
Loop Tack:
Peel Adhesion:
2.6 - 3.2 lbs
1.6 - 2.2 lbs
Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.
Basis Weight:
42.40# per ream, ± 10%
(500 sheets 24" x 36")
Caliper:
0.00244 inches ± 10%
Tensile:
MD 39.70# per inch width
CD 14.70# per inch width
Tear:
MD 34.70 grams
CD 41.80 grams
Total Construction Caliper
(approximate):
0.00524 inches ±10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511