Print this Page
Fasson® Standard Laser-RiteTM/LP430/50#MF
Spec# 02962
Facestock:
Fasson® Standard Laser-Rite™ is an uncoated facestock providing excellent toner anchorage. Designed to process through most medium-speed to high-speed, sheet-fed laser printers. May also be used in continuous form laser printers.



Basis Weight:
41.8# per ream ± 5%
(500 sheets 25" x 38")


Caliper:
0.0031 inches ± 10%


Tensile:
MD 29# per inch width
CD 17# per inch width


Tear:
MD 55 grams per sheet
CD 60 grams per sheet


Stiffness:
MD 90 mg
CD 50 mg
Adhesive:
Fasson® LP430 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. The adhesive is resistant to high temperatures from laser printers and displays excellent diecutting and stripping characteristics.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: 50# Uncoated Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

3.7 lbs
1.7 lbs-tear

Treated HDPE
Loop Tack:
Peel Adhesion:

3.2 lbs
1.8 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

2.9 lbs
1.3 lbs-tear

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs-Pulled Fiber
1.4 lbs-tear-Pulled Fiber

Glass
Loop Tack:
Peel Adhesion:

3.7 lbs
2.2 lbs-tear
Liner:
50#MF is a coated liner which adds to the overall stability of the total construction.  Used primarily for roll-to-sheet applications.



Basis Weight:
48# per ream
(500 sheets 24" X 36")


Caliper:
0.0034 inches ± 10%


Tensile:
MD 30# per inch width
CD 15# per inch width


Tear:
MD 50 grams per sheet
CD 39 grams per sheet
Total Construction Caliper (approximate): 0.0073 inches ± 10%

Applications and Uses
This product is suitable for use in a wide range of roll-to-sheet laser applications where high quality printing and layflat are critical. Fasson® LP430 is specially engineered to process through continuous form hot fusion laser printers (except IBM 3800, HP 2680 A, Data Graphics 9800 Series, Siemens 2300). Fasson® LP430 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

"Laser imaging is accomplished with the use of high heat and pressure. To reduce the potential for adhesive contamination in the laser printer, the removal of matrix around all perimeter edges of the finished sheet of labels is recommended with this product."

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511