Print this Page
Fasson® 3 Mil Clear MDO/S692N/40#BG
Spec# 78097
Facestock:
Fasson® 3 Mil Clear MDO is a corona-treated, flexible matte clear polyolefin with exceptional dimensional stability for use in a wide range of applications, including prime labels. Printable by UV screen, UV letterpress, flexo, solvent gravure, and water-based flexo inks. Use of in-line corona treatment will greatly expand the number of inks which can be used. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.

This product can be diecut and stripped at high speeds on standard web-fed presses using typical film tooling. Excellent dispensability with direct comparison to clear *OPTICITE™ and better performance over clear MDPE and clear flex vinyl.

*OPTICITE™ is a trademark of The Dow Chemical Company.



Basis Weight:
n/a


Caliper:
0.0030 ± 7%


Tensile:
MD 19,000 psi
CD 3,300 psi


Tear:
n/a


Stiffness:
n/a
Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs

Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs










Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability; requires a converter-applied primer for UV printing.



Basis Weight:
39.3# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.00225 inches ±10%


Tensile:
MD 43# per inch width
CD 17# per inch width


Tear:
MD 35 grams
CD 43 grams
Total Construction Caliper (approximate): 0.00605 inches ± 10%

"This specification is recognized by the Association of Plastic Recyclers (APR)  for the recycling of HDPE bottles."


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511