Print this Page
Fasson® 2 Mil Clear Acetate/S730/50#SCK ABC ("anti-block coating")
Spec# 60097
Facestock:
Fasson® 2 Mil Clear Acetate is a clear acetate film featuring good clarity and excellent printability with most flexographic film inks. This product is suitable for a wide variety of labeling applications, including point-of-purchase and tamper evident labeling applications. Suitable for indoor use only.



Basis Weight:
N/A


Caliper:
0.0017 inches ± 10%


Tensile:
MD 9,000 psi
CD 9,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® S730 adhesive is a clear adhesive featuring good initial tack, high shear, minimal cold flow and ultimate adhesion to a wide variety of substrates.





Type:
Solvent Acrylic


Minimum Application Temperature:
+45° F


Service Temperature Range:
-40° F to +300° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.1 lbs
4.2 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
5.4 lbs

Alkyd Enamel Paint
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
1.7 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
0.7 lbs
Liner:
50#SCK is a bleached, super-calendered kraft paper stock with very good die cutting and matrix stripping properties. Used primarily for roll-to-roll and fanfold label applications. Not recommended for sheeted applications. Test suitability for use in fanfold label applications due to ABC ("anti-block coating") applied to backside of the liner to control adhesive and label transfer in finished, wound rolls. Backside printable with many water-based flexo inks.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0057 inches ± 10%

Printing/Converting
This product is printable with most flexographic film inks. This product can be diecut and stripped at high speeds on standard web-fed presses. Sample labels in a variety of shapes have been dispensed and applied successfully with standard labeling systems.

Applications and Uses
This product is suitable for a wide variety of labeling applications including point-of-purchase and tamper evident labeling applications.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511