Print this Page
Fasson® 2.3 Mil White BOPP TC/S692N/40#BG
Spec# 78333
Facestock:
Fasson® 2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.

Use caution when applying inks to the edge of the label, particularly UV-cured inks and varnishes. High-shrinkage coatings can cause labels to lift off the liner or substrate.



Basis Weight:
N/A


Caliper:
0.0023 inches ± 10%


Tensile:
MD 18,500 psi
CD 35,000 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.



HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs


PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs


Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs











Liner:
Fasson® 40#BG is a bleached glassine white liner with excellent roll label converting properties. Designed for low- to medium-speed dispensing applications. Not recommended for sheeted applications. Features good back printability.



Basis Weight:
37.20# per ream
(500 sheets 24" x 36")


Caliper:
0.00211 inches ± 10%


Tensile:
MD 44 pounds per inch
CD 19 pounds per inch


Tear:
MD 41 grams
CD 46 grams

Total Construction Caliper (approximate): 0.00521 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511