DURABLE PORTFOLIO
Product Data Sheet
Fasson® 4 Mil White Flex Vinyl ITC/S8025/50#SCK
(4M WH FLEX ITC/S8025)
Spec#: 79246 Durables
FacestockFacestock physical properties
4 mil white flexible top coated vinyl with excellent opacity, good tear strength and weather resistance, but relatively low heat resistance. The top coating is designed for HP Indigo printing process.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0034
inches
86.36
microns
Tensile:
ASTM D882
MD
3,500
PSI
246
kg/cm2
CD
3,000
PSI
211
kg/cm2
AdhesiveAdhesive physical properties
S8025 is a high performance, clear permanent solvent acrylic pressure sensitive adhesive with balanced adhesion to a wide variety of substrates, including low surface energy plastics, engineering grade plastics, bare, coated, or painted metals, including powder coat and enamel paints. It features medium tack for good short term repositionability, low ooze, and excellent chemical and UV resistance for outdoor industrial applications.
Imperial Value
Units
Metric Value
Units
Type:
Solvent Acrylic
Caliper:
ASTM D1000
0.0009
Inches
22.86
microns
Standard Coat Wt:
27
g/sq m
Minimum Appl Temp:
50
F
10
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
50.6
oz/in
55.7
N/100 mm
LinerLiner physical properties
50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0032
inches
81.2800
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
57.7
lbs/ream
92.3
g/sq m
Tensile:
ASTM D882
MD
51.0
psi
229.5
N/25mm
CD
22.7
psi
102.1
N/25mm
Tear:
TAPPI T414
MD
2.0
ounce
57.0
grams
CD
2.7
ounce
77.0
grams
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
55
0.0075 inches (7.5 mils, 190.5 microns)

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
· HP Indigo Certified for the ws4000 series and the ws6000 industrial roll fed presses.

Applications and Uses
This product is suitable for wide variety of durable labeling applications such as:
· Product identification labels
· Rating plates
· Property identification and asset tags
· Durable goods labeling
UL recognition MH8212

Printing and Converting
The ITC top coat is suitable for HP Indigo printing processes using the ws40000 and ws6000 roll fed presses.
This product can be die cut and stripped at high speeds on standard web-fed presses. Sample labels in a variety of shapes have been successfully dispensed and applied with standard labeling systems.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
hp-130710
Compliance Recognition: UL, C-U
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. Acrylic PCP*

    3. Aluminum

    4. Epoxy Paint

    5. Epoxy PCP*

    6. Galvanized Steel

    7. Glass

    8. Melamine

    9. Nylon (polyamide)

    10. Phenolic

    11. Polycarbonate

    12. Polyester Paint

    13. Polyester PCP*

    14. Poly (Urethane) PCP*

    15. Porcelain

    16. Stainless Steel

    17. Unsat Thermoset Polyester

    18. Acrylic Plastic

    19. ABS Plastic

    20. Epoxy Paint

    21. Polyethylene

    22. Polyphenolene Oxide

    23. Polypropylene

    24. Polystyrene

    25. PVC (Rigid)
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
212

212

212

212

212

212

212

212

212

212

212

212

212

212

212

212

212

176

176

176

176

176

176

176

176
100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

100

80

80

80

80

80

80

80

80
I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O

I/O
Recognized Ribbons:



Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for labeling materials
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Metals

    2. Electrostatic Paints

    3. Plastics Group I

    4. Plastics Group II

    5. Plastics Group III

    6. Plastics Group IV

    7. Plastics Group V

    8. Plastics Group VI

    9. Plastics Group VII

    10. Plastics Group VIII
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
212

212

212

176

176

176

176

176

176

176
100

100

100

80

80

80

80

80

80

80
I/O

I/O

I/O

I/O

I

I

I

I

I

I
Recognized Ribbons:


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511