Print this Page

Fasson® 2 Mil Metallized BOPP TC/S7000/1.2 Mil Polyester
Spec# 78889
Facestock:
Fasson® 2.0 mil Metallized BOPP TC is a topcoated biaxially-oriented polypropylene film which features mirror-like reflectivity and a topcoat to ensure excellent results for a broad set of printing methods including flexographic, UV, and web screen. This product can be die cut and stripped at high speeds on standard web-fed presses with either flatbed or rotary dies. For best performance, it is recommended that dies be tooled specifically for this construction. This product offers excellent dispensing characteristics. The Fasson® 2.0 mil Metallized BOPP TC provides a good print surface on such printing platforms as Durst® Tau line of printers (UV Inkjet) for distinguished wine, beverage, and gourmet food labels. Use caution when applying inks out to the edge of the label, particularly UV screen inks, and UV cured varnishes. High shrink coatings can cause label edge-lift.

NOTE: Qualification is a subjective evaluation and customer perception may differ. As label designs vary, we encourage end application testing of all materials.




Basis Weight:

n/a


Caliper:

0.0020 inches ± 10%


Tensile:

MD 30,450 psi
CD 24,650 psi


Tear:

n/a


Stiffness:

n/a

Adhesive:
Fasson® S7000 is a clear, general purpose permanent acrylic adhesive. It exhibits a balance of release properties to enable high speed converting and dispensing on increasingly-thinner substrates. Adhesion performance is designed for low surface energy substrates, enabling lasting performance on rigid and squeezable containers. It has been specifically designed to exhibit excellent wet-out characteristics and water-whitening resistance.

FDA compliance: Fasson® S7000 adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance with this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or, (2) has incidental contact with food, limited to the trace amount at the seams or edges of the label.




Type:

Emulsion Acrylic


Minimum Application Temperature:

25° F


Service Temperature Range:

-40° F to +175° F, subject to facestock limitations


Typical Performance Data: Tested with 2 mil clear polypropylene facestock at room temperature on standard lab panels.



HDPE
Loop Tack:
Peel Adhesion:


Target 1.3 lbs.
Target 1.3 lbs.


PET
Loop Tack:
Peel Adhesion:


Target 3.5 lbs.
Target 2.0 lbs.


Glass
Loop Tack:
Peel Adhesion:


Target 2.6 lbs.
Target 1.8 lbs.


Polypropylene
Loop Tack:
Peel Adhesion:


Target 1.4 lbs.
Target 1.5 lbs.






Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:

N/A


Caliper:

0.00116 inches ± 10%


Tensile:

MD 32,000 psi
CD 32,000 psi


Tear:

N/A

Total Construction Caliper (approximate): 0.00398 inches ± 10%

Fasson® and all other Avery brands, product names and codes are trademarks of Avery Dennison Corporation.


Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.



label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511