Durable Form

DURABLE PORTFOLIO

Product Data Sheet

Fasson® 2 Mil White Void Polyester TC/S8015W/50#SCK

Spec#: 78194 - DO NOT USE (TRANSITION
SPEC B6003)

Facestock	Facestock physical properties
2 Mil White Voidable Polyester TC is a glossy white polyester incorporating a patterned release layer which leaves the word "VOID," showing evidence of tampering when removed from a substrate. The facestock is specially topcoated to enhance flexographic, UV letterpress, and thermal transfer printing.			Imperial Value	Units	Metric Value	Units
	Caliper: ASTM D1000		2.3600	MIL	59.94	Micron
	Tensile: ASTM D882	MD	31,200	PSI	2,193	kg/sq cm
	Tensile: ASTM D882	CD	36,900	PSI	2,594	kg/sq cm

Adhesive	Adhesive physical properties
Fasson® S-8015WVOID is a high strength white adhesive featuring high initial tack, adhesion, and shear. S-8015WVOID is recommended for most high and medium surface energy materials. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application. Excellent chemical and UV resistance.			Imperial Value	Units	Metric Value	Units
	Type:		Solvent Acrylic
	Caliper: ASTM D1000		0.0010		25.40	microns
	Standard Coat Wt:				32	g/sq m
	Minimum Appl Temp:		45	F	7	C
	Service Temp Range:	Min	-6	F	-21	C
	Service Temp Range:	Max	300	F	149	C
	Loop Tack Stainless Steel: PSTC11		16.5	oz/in	18.2	N/100mm

Liner	Liner physical properties
50#SCK is a bleached, super-calendered paper stock with very good diecutting and matrix stripping properties. Suitable for back-printing with standard inks.			Imperial Value	Units	Metric Value	Units
	Caliper: ASTM D1000		0.0032	inches	81.2800	microns
	Basis Wt: TAPPI T410 * (24" x 36" 500 sheets)		53.9	lb/ream	86.2	g/sq m
	Tensile: ASTM D882	MD	48.0	lb/inch	211.2	N/25 mm
	Tensile: ASTM D882	CD	26.0	lb/inch	114.4	N/25 mm
	Tear: TAPPI T414	MD	1.8	ounces	51.1	grams
	Tear: TAPPI T414	CD	2.0	ounces	56.8	grams

Liner Release: TMLI 90^o removal of Liner from Facestock.		Total Construction Caliper (approximate):
Rate of Removal	Grams/2" Width
400 inches/min.	60	0.0062 inches (6.2 mils; 157.48 microns)

DURABLE PORTFOLIO

Product Data Sheet

Features and Benefits

Opaque white with good hiding power and physical strength
Glossy top coat that accepts most flexographic, letterpress, and rotary screen inks
Excellent thermal transfer printability with most wax/resin and resin ribbons
Good adhesion to most substrates
Tamper-evident when removal from substrate is attempted
The "VOID" left on facestock and substrate when removed

Applications and Uses
This product is suitable for wide variety of labeling applications such as:

Product authentication labels
Nameplates and rating plates
Property identification and asset tags
Security labels for over the counter drugs and other packaging applications
Non-transferable labels or security tags

See Technical Bulletin "Tamper-Evident Polyesters" for proper end use and surface preparation

Printing and Converting
The top coat is designed for printing by flexography with most solvent and some water based inks. Specially formulated inks are normally not needed, however, testing is recommended prior to final ink selection. Suitable for thermal transfer printing applications with select ribbons and printer models. This product can be die cut and stripped at moderate speeds on standard web-fed presses. Although not intended for auto-application, sample labels have been successfully dispensed and applied at moderate speeds with standard labeling systems.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.

DURABLE PORTFOLIO

Product Data Sheet

Appendix

Compliance Recognition:

409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company

The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511