Print this Page
Fasson® Pharmaceutical Cast Gloss+/S717P/Ultraliner®
Spec# 53281 - New CastGloss Face 3/2014
Facestock:
Fasson® Pharmaceutical Cast Gloss+ is a superior cast coated paper featuring high strength and excellent ink receptivity. Prints well with flexo, letterpress, screen, and offset ink systems.



Basis Weight:
60# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0038 inches ± 10%


Tensile:
MD 30# per inch width
CD 15.4# per inch width


Tear:
MD 63 grams per sheet
CD 67 grams per sheet


Stiffness:
MD 130 mg
CD 50 mg

Adhesive:
Fasson® S717P is a permanent acrylic adhesive offering high initial tack, minimal cold flow, and excellent mandrel holding power. It performs well on a variety of substrates, including plastics and glass. Its excellent holding power prevents edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S717P provides excellent diecutting and stripping characteristics, as well as automatic labeling features. It is suitable for use in applications where sterilization methods are used, and is ideal for critical pharmaceutical applications requiring extended component change notification.

FDA Compliance: S717P adhesive complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food; or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-65° F to +250° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

3.7 lbs
2.0 lbs - tear


HDPE
Loop Tack:
Peel Adhesion:

2.5 lbs
1.8 lbs - tear


Recycled Corrugated
Loop Tack:
Peel Adhesion:

2.5 lbs - pulled fibers
1.4 lbs - pulled fibers


Glass
Loop Tack:
Peel Adhesion:

4.3 lbs
2.1 lbs - tear


Polypropylene
Loop Tack:
Peel Adhesion:

1.8 lbs
1.7 lbs - tear

Liner:
Fasson® Ultraliner® is an extruded polyolefin film liner designed primarily for high speed dispensing applications. High tensile strength virtually eliminates web breaks in high speed dispensing applications.



Basis Weight:
32# per ream ±10%
(500 sheets 24"x36")


Caliper:
0.0024 inches


Tensile:
MD 32,600 psi
CD 3,900 psi


Tear:
N/A

Total Construction Caliper (approximate): 0.0070 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511