Fasson® 60# Semi-Gloss Elite^TM is a bright, blue-white, 60# C1S, super calendered paper. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based Flexo, UV Flexo, and UV Letterpress inks. It has improved smoothness while maintaining strength for good converting and dispensing.

	Basis Weight:	60.0# per ream ± 10% (500 sheets 25" x 38")
	Caliper:	0.0031 inches ± 10%
	Tensile:	MD 35# per inch width CD 19# per inch width
	Tear:	MD 47 grams per sheet CD 46 grams per sheet
	Stiffness:	MD 100 mg CD 60 mg

Adhesive:
Fasson® S2501 is a versatile, general purpose permanent adhesive designed for excellent adhesion to corrugated cardboard and superior adhesion to plastics. Excellent initial tack without sacrificing high speed converting. For use with all information printing technologies, including laser. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+38°F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels

	Recycled Corrugated Loop Tack: Peel Adhesion:	0.8 - 1.1 lbs 0.6 - 0.8 lbs
	Rigid HDPE Loop Tack: Peel Adhesion:	1.6 - 2.4 lbs 1.1 - 1.6 lbs
	Treated LDPE Loop Tack: Peel Adhesion:	1.1 - 1.6 lbs 1.2 - 1.6 lbs
	PVC Film Loop Tack: Peel Adhesion:	2.1 lbs 2.5 - 2.7 lbs
	Glass Loop Tack: Peel Adhesion:	3.1 - 3.3 lbs 1.9 lbs

Liner:
Fasson® 40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Excellent diecutting and stripping characteristics. Used primarily for roll-to-roll label applications.

	Basis Weight:	41.5# per ream ±10% (500 sheets 24" x 36")
	Caliper:	0.00245 inches ±10%
	Tensile:	MD 41# per inch width CD 17# per inch width
	Tear:	MD 37 grams CD 45 grams

Adhesive:
Fasson® S2501 is a versatile, general purpose permanent adhesive designed for excellent adhesion to corrugated cardboard and superior adhesion to plastics. Excellent initial tack without sacrificing high speed converting. For use with all information printing technologies, including laser. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion Acrylic
	Minimum Application Temperature:	+38°F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels

	Recycled Corrugated Loop Tack: Peel Adhesion:	0.8 - 1.1 lbs 0.6 - 0.8 lbs
	Rigid HDPE Loop Tack: Peel Adhesion:	1.6 - 2.4 lbs 1.1 - 1.6 lbs
	Treated LDPE Loop Tack: Peel Adhesion:	1.1 - 1.6 lbs 1.2 - 1.6 lbs
	PVC Film Loop Tack: Peel Adhesion:	2.1 lbs 2.5 - 2.7 lbs
	Glass Loop Tack: Peel Adhesion:	3.1 - 3.3 lbs 1.9 lbs

Liner:
50#SCK is a bleached supercalendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.

	Basis Weight:	52.2# per ream ±10% (500 sheets 24" x 36")
	Caliper:	0.0032 inches ±10%
	Tensile:	MD 39# per inch width CD 20# per inch width
	Tear:	MD 48 grams per sheet CD 58 grams per sheet

Total Construction Caliper (approximate): 0.0104 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

label.averydennison.com

Label and Packaging Materials-North America 8080 Norton Parkway Mentor, OH 44060 800-944-8511