Print this Page
Fasson® 4 Mil DT BOPP/FA20B/40#SCK
Spec# 78462
Facestock:
Fasson® Direct-Therm 200 BOPP 4 Mil is a smooth, bright white BOPP base film coated wtih a medium-sensitivity thermal layer. Topcoated to provide excellent environmental resistance.



Basis Weight:
n/a


Caliper:
0.0040 inches ± 10%


Tensile:
MD 12,000 PSI
CD 19,000PSI


Tear:
n/a


Stiffness:
MD 84.9 mg
CD 109.7 mg
Adhesive:
Fasson® FA20 is a permanent adhesive developed to combine the optimum in cold-temperature performance with good diecutting and stripping characteristics. Fasson® FA20 was developed specifically for use in freezer and cold temperature applications. This adhesive will develop a permanent bond to most packaging films and materials when applied at temperatures as low as 0° F. Fasson® FA20 is noted for its outstanding performance on waxy corrugated cardboard. It is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Hot Melt Rubber


Minimum Application Temperature:
0° F


Service Temperature Range:
-65° F to +160° F
Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

1.4 lbs
0.7-1.0 lbs

Treated HDPE
Loop Tack:
Peel Adhesion:

1.3 lbs
0.7-0.9 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

1.3 lbs
0.7-0.9 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

0.7 lbs
0.4-0.6 lbs

Glass
Loop Tack:
Peel Adhesion:

1.3 lbs
0.6-0.8 lbs
Liner:
40# SCK is a semi-bleached, super-calendered kraft paper featuring high internal strength, toughness, and tear resistance. Excellent for diecutting and stripping; used primarily for roll-to-roll applications.



Basis Weight:
42.5# per ream ±10%
(500 sheets 24" x 36")


Caliper:
0.0025 inches ±10%


Tensile:
MD 38# per inch width
CD 22.5# per inch width


Tear:
MD 34 grams
CD 37 grams
Total Construction Caliper (approximate): .0073 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511