Print this Page
Fasson® Pharmaceutical Semi-Gloss/S727/Ultraliner®
Spec# 53410
Facestock:
Fasson® Pharmaceutical Semi-Gloss is a bright, blue-white, 60# C1S, super calendered paper. This facestock offers a marked improvement in appearance by significantly reduced occurrence of surface contamination defects versus previous generation Pharmaceutical FasGloss™ options. Pharmaceutical Semi-Gloss prints well up to 175 line screen, and is suited for water-based flexo, UV flexo, and UV letterpress inks.



Basis Weight:
60.0# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0031 inches ± 10%


Tensile:
MD 35# per inch width
CD 19# per inch width


Tear:
MD 47 grams per sheet
CD 46 grams per sheet


Stiffness:
MD 100 mg
CD 60 mg
Adhesive:
Fasson® S727 is a permanent adhesive featuring high initial tack, minimal cold flow, and ultimate bond strength to a wide variety of surfaces. Fasson® S727 has excellent holding power, which helps prevent edgelift and butterflying of labels when applied to small diameter surfaces. Fasson® S727 provides excellent diecutting and stripping characteristics as well as automatic labeling features. It is suitable for use in applications where Autoclave, Gamma Radiation and EtO sterilization methods are used.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-65° F to +250° F
Typical Performance Data: 60# C1S Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

2.5 lbs
2.6 lbs-tear

Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
2.6 lbs-tear

Polypropylene
Loop Tack:
Peel Adhesion:

2.1 lbs
1.5-1.8 lbs

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs
1.1-1.3 lbs-Pulled Fiber

Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
2.6 lbs-tear
Liner:
Fasson® Ultraliner® is an extruded polyolefin film liner designed primarily for high speed dispensing applications. High tensile strength virtually eliminates web breaks in high speed dispensing applications.



Basis Weight:
32# per ream ±10%
(500 sheets 24"x36")


Caliper:
0.0024 inches


Tensile:
MD 32,600 psi
CD 3,900 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.0063 inches ±10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511