Fasson® Trans-Therm® 1C FSC® is an ultra-smooth, coated facestock which provides premium barcode printing for high-speed and medium-speed printers. This product is suitable for use in applications where high quality barcode printing is critical. Smudge resistance has been optimized for a coated paper, but caution is recommended with contact scanners. Fasson® Trans-Therm® 1C FSC® offers reduced mottle flexographic floodcoating and high-speed, wide-web converting.

The FSC® certification ensures that products come from well managed forests that provide environmental, social, and economic benefits. The FSC® chain of custody certification verifies that FSC® certified material is identified or kept segregated from non-certified or non-controlled material through this chain.

	Basis Weight:	47.30 # per ream (500 sheets 25" x 38")
	Caliper:	0.0029 inches ± 10%
	Tensile:	MD 26# per inch width CD 17# per inch width
	Tear:	MD 40 grams per sheet CD 40 grams per sheet
	Stiffness:	MD 170 mN CD 100 mN

Adhesive:
Fasson® AT20 is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20 is an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion acrylic
	Minimum Application Temperature:	-20° F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , Tested with 60# C1S Paper at room temperature on standard lab panels.

	Stainless Steel Loop Tack: Peel Adhesion:	2.7 lbs 2.2-3.0 lbs
	Treated HDPE Loop Tack: Peel Adhesion:	2.4 lbs 1.1-2.1 lbs
	Polypropylene Loop Tack: Peel Adhesion:	2.9 lbs 1.8-2.4 lbs
	Recycled Corrugated Loop Tack: Peel Adhesion:	1.6 lbs 1.1-2.1 lbs; pulled fiber
	Glass Loop Tack: Peel Adhesion:	2.9 lbs 1.1-2.0 lbs

Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.

	Basis Weight:	42# per ream ± 10% (24" X 36" 500 sheets)
	Caliper:	0.0025 inches ± 10%
	Tensile:	MD 38# per inch width CD 20# per inch width
	Tear:	MD 36 grams CD 41 grams

Adhesive:
Fasson® AT20 is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20 is an ideal adhesive for warehouse applications. Fasson® AT20 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.

	Type:	Emulsion acrylic
	Minimum Application Temperature:	-20° F
	Service Temperature Range:	-65° F to +200° F

Typical Performance Data: , Tested with 60# C1S Paper at room temperature on standard lab panels.

	Stainless Steel Loop Tack: Peel Adhesion:	2.7 lbs 2.2-3.0 lbs
	Treated HDPE Loop Tack: Peel Adhesion:	2.4 lbs 1.1-2.1 lbs
	Polypropylene Loop Tack: Peel Adhesion:	2.9 lbs 1.8-2.4 lbs
	Recycled Corrugated Loop Tack: Peel Adhesion:	1.6 lbs 1.1-2.1 lbs; pulled fiber
	Glass Loop Tack: Peel Adhesion:	2.9 lbs 1.1-2.0 lbs

Liner:
40#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.

	Basis Weight:	42# per ream ± 10% (24" X 36" 500 sheets)
	Caliper:	0.0025 inches ± 10%
	Tensile:	MD 38# per inch width CD 20# per inch width
	Tear:	MD 36 grams CD 41 grams

Total Construction Caliper (approximate): 0.0098 inches ±10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

label.averydennison.com

Label and Packaging Materials-North America 8080 Norton Parkway Mentor, OH 44060 800-944-8511