Print this Page
Fasson® 2.3 Mil White BOPP TC/R3400/1.2 Mil Polyester
Spec# 78632
Facestock:
Fasson® 2.3 Mil White BOPP TC is a heat set, biaxially-oriented, coextruded polypropylene film, with good opacity and a bright white high gloss background. The surface has been topcoated to provide superior printability by UV and water-based flexographic, gravure, silkscreen, and letterpress processes, using a wide variety of different inks. This facestock has excellent moisture resistance, and good diecutting and dispensing characteristics.



Basis Weight:
N/A


Caliper:
0.0023 inches ± 10%


Tensile:
MD 26,825 psi
CD 22,475 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® R3400 is a general purpose removable adhesive featuring moderate initial tack and minimal adhesion build over time. It offers a consistent level of adhesion and long term removability across a wide variety of substrates. R3400 complies with Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components into the food; or, (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
-40° F to +176° F, subject to facestock limitations
Typical Performance Data:


Stainless steel
Loop Tack:
Peel Adhesion:

1.127 lbs
1.050 lbs




















Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
N/A


Caliper:
0.00116 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00428 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511