Print this Page
Fasson® 0.7 Mil Clear BOPP/S2001/1 Mil Polyester
Spec# 74994
Facestock:
Fasson® 0.7 Mil Clear BOPP is an ultra clear, semi-conformable polypropylene film designed to provide the "no label look" on glass and rigid clear plastic containers. Printable by web screen, UV letterpress, gravure and flexographic.

High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be diecut and stripped at high speeds on standard web-fed presses with either flat bed or rotary dies. For best performance, it is recommended to have dies tooled specifically for this construction. Proven dispensing and performance on existing equipment with possible slight modifications meet newer, high-speed applicators available today. Product must be used in tandem with an overlaminate.



Basis Weight:
n/a


Caliper:
0.00075 inches +/- 10%


Tensile:
MD 15,000 psi
CD 38,700 psi


Tear:
n/a


Stiffness:
n/a

Adhesive:
Fasson® S2001 is a clear permanent adhesive designed for prime film labeling where exceptional optical clarity is required. Suited to clear squeezable and clear facestock applications, S2001 provides short-term repositionability, and good ultimate adhesion to a wide variety of substrates. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester Facestock at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

2.5 lbs
2.2 lbs


Aluminum
Loop Tack:
Peel Adhesion:

N/A
2.8 lbs


Flame Treated Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.3 lbs


Flame Treated HDPE
Loop Tack:
Peel Adhesion:

N/A
1.4 lbs


Glass
Loop Tack:
Peel Adhesion:

N/A
2.4 lbs

Liner:
A 1 mil durable polyester liner suitable for high speed diecutting and stripping applications. Used primarily for roll-to-roll applications.



Basis Weight:
N/A


Caliper:
0.00105 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
N/A
N/A

Total Construction Caliper (approximate): 0.0026 inches ± 10%

Printing/Converting:
Printable by web screen, UV letterpress, gravure and flexographic. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection. This product can be die cut and stripped at high speeds on standard web-fed presses with either flat bed or rotary dies. For best performance, it is recommended to have dies tooled specifically for this construction. Proven dispensing and performance on existing equipment with possible slight modifications meet newer, high-speed applicators available today. Product must be used in tandem with an overlaminate.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511