Print this Page
Fasson® 2 Mil Super Clear Polystyrene/S1000/44#PK
Spec# 71077-REV 4/2024L
Facestock:
Fasson® 2 Mil Clear Polystyrene is a versatile thermoplastic resin, corona treated to assist in printability. The film stiffness allows for easy converting and dispensing. Printable by flexography and UV letterpress. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to ink selection. This product can be diecut and stripped at normal speeds on standard web-fed presses. Sample labels in a variety of shapes have been dispensed and applied successfully with standard labeling systems.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 15,000 psi
CD 28,000 psi


Tear:
N/A


Stiffness:
N/A

Adhesive:
Fasson® S1000 is a clear permanent adhesive specifically designed to exhibit excellent wet-out characteristics on clear films. Frequently used in the prime label market where squeezability and clear labeling are critical. Meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to +200° F, subject to facestock limitations


Typical Performance Data: 2 Mil Clear Polyester facestock at room temperature on standard lab panels



Stainless Steel
Loop Tack:
Peel Adhesion:

3.2 - 3.6 lbs
1.9 - 2.3 lbs


HDPE
Loop Tack:
Peel Adhesion:

1.0 - 1.5 lbs
0.8 - 1.3 lbs


Glass
Loop Tack:
Peel Adhesion:

2.8 - 3.3 lbs
2.0 - 2.3 lbs











Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. NOTE: Liner color variation may occur.



Basis Weight:
43# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00320 inches +/- 10%


Tensile:
MD 28.5# per inch width
CD 16# per inch width


Tear:
n/a

Total Construction Caliper (approximate): 0.0060 inches ± 10%

Printing/Converting
Printable by flexography and UV letterpress. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to ink selection. Can be diecut and stripped at normal speeds on standard web-fed presses. Sample labels in a variety of shapes have been dispensed and applied successfully with standard labeling systems.

Applications and Uses
This product is suitable for a wide variety of labeling applications, including prime label. This product is not recommended for outdoor exposure.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511