Product Data Sheet
FassonŽ Rapid-RollŽ White Stickpak w/ LDPE 280 HB
Spec# 79340
Revised 9.8.18



Description:
FassonŽ Rapid-RollŽ White StickPak w/ LDPE 280HB surface printable polyester-faced laminated pouching material designed for tubular form fill and seal equipment. The polyester film offers good puncture resistance versus paper, and a  high gloss for excellent graphic presentation.  Structure requires flexible packaging inks & varnishes for form, fill and seal process. Contact your ink supplier for specific recommendations. Fit for use testing required.

Construction consists of 48g PET/WH PE/FOIL/21.6#LDPE

Compliance:
The food contact layer complies with FDA 21CFR 177.1520(c) 2.2. The food contact layer complies with EU 10/2011 and EC 1935/2004 under the condition that the finished article meets the following specific migration limits (SML): methacrylic acid = 6 mg/kg, zinc oxide = 25 mg/kg.



Properties:
Physical Property
Typical Value
Test Method
Caliper
Yield
2.8 mils
8.1 msi/lb
ASTM T 411
ASTM D 4321
Layer Property
Results
Typical Value
Test Method
Exterior Layer Performance Properties
Ink Recommendation
Optical Properties
Flex Pack Film Inks
Excellent
N/A
N/A
N/A
N/A
Barrier Layer Performance Properties
Chemical Resistance
Light
Moisture Vapor Trans Rate
Odor
Oxygen Vapor Trans Rate
Fair
Excellent
0.0004
Excellent
.0005
N/A
N/A
grams/100 sq. in. day
N/A
cc/100 sq in/24 hr
N/A
N/A
ASTM F1249
N/A
ASTM D3985
Sealant Layer Performance Properties
Coefficient of Friction
Puncture Resistance
Seal Initiation Temperature
Seal Strength
Seal through Contamination
Burst Strength
Target .14
11
340°
1800
Fair
50
Kinetic (seal side)
pounds of force
N/A
N/A
N/A
psi
ASTM D1894
N/A
N/A
N/A
N/A
N/A










Target Markets:
Food (dry or semi-liquid), Nutraceutical and Health/Personal Care



End Uses:
Drink mixes, sugar sweeteners for retail and food service packaging, nutritional supplements.  






Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH



Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.



www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511