DURABLE PORTFOLIO
Product Data Sheet
Fasson® 1 Mil Clear UV PRT PET/S3000/1Mil Polyester
(1M CL UV PET/S3000)
Spec#: 79325 Durables
FacestockFacestock physical properties
1M UV Clear Print Treated PET, a clear UV blocking 1 mil PET with good strength, dimensional stability, and excellent chemical resistance with high clarity. UV blocker is added to reduce UV transmission rate.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0010
inches
0.03
mm
Tensile:
ASTM D882
MD
31,000
PSI
2,179
kg/sqcm
CD
33,500
PSI
2,355
kg/sqcm
AdhesiveAdhesive physical properties
Fasson® S3000 is a clear permanent adhesive designed for prime labeling, including squeezable and clear facestock applications. Designed for low ooze and high temperature resistance. FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion acrylic
Caliper:
ASTM D1000
0.0008
inches
20.32
microns
Standard Coat Wt:
21
g/sq m
Minimum Appl Temp:
25
F
-4
C
Service Temp Range:
Min
-40
F
-40
C
Max
302
F
150
C
Loop Tack Stainless
Steel: PSTC11
28.8
oz/in
31.7
N/100mm
LinerLiner physical properties
A 1.0 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0011
inches
26.9240
micron
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
0.0
0.0
g/sq m
Tensile:
ASTM D882
MD
32,000.0
psi
3,200.0
kg/cm2
CD
32,000.0
psi
3,200.0
kg/cm2
Tear:
TAPPI T414
MD
0.0
0.0
CD
0.0
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
40
0.0029 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits
Applications and Uses
Designed for overlamination of polyester or vinyl label materials to protect press printing from abrasion and UV exposures.

Printing and Converting
Not designed to receive surface printing, however, can be thermal transfer printed with wax/resin, hybrid, and resin based thermal transfer ribbons. Testing is highly recommended before the final selection of a ribbon for final end use. Can be die cut and stripped with most film and paper facestocks at high speeds on standard roll press equipment. Can enhance label dispensing

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix

Compliance Recognition: UL, C-U
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. on PET Labels

    2. on PVC Labels
-40

-40
-40

-40
302

212
150

100
I/O

I/O
Recognized Ribbons: Armor "AXR7+", Armor "AXR8", Armor "AXR600", Astro Med Inc "R-5", Astro Med "RY", DNP "R-300", DNP "R-510", DNP "TR4070", DNP "Signature Series Resin", Iimak "SP-410", Iimak "SP-330", Iimak "Primemark", ITW "B324", Kurz "K500", NCR "Promark 3", NCR "Pacesetter", NCR "Ultra V", NCR "Perma Max", NCR "K3", Ricoh "B110C", Ricoh "B110CR", Sato Corp. "Premier 1", Zebra "5095", Zebra "5100", Zebra "5555", Zebra "Z-4100"



Tested by Underwriters Laboratories, Inc.
to meet the requirements of the Canadian Standards Association for labeling materials
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. on PET Labels

    2. on PVC Labels
-40

-40
-40

-40
302

212
150

100
I/O

I/O
Recognized Ribbons: Armor "AXR7+", Armor "AXR8", Armor "AXR600", Astro Med "RY", Iimak "SP-330", ITW "B324", Kurz "K500", NCR "Promark 3", NCR "Perma Max", NCR "K3", Sato Corp. "Premier 1", Zebra "5095", Zebra "5100", Zebra "Z-4100"


409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511