Print this Page
Fasson® 8 Pt. Dry Tag
Spec# 01021
Facestock:
Fasson® 100# Tag is a white, coated 8pt. tag stock suitable for applications requiring a stiff facestock with high internal strength. Prints well using screen, offset and solvent/water based flexo, fair printability using UV ink systems, not recommended for imprinting.



Basis Weight:
121# per ream ±10%
(500 sheets 25"x38")


Caliper:
0.0080 inches ±10%


Tensile:
MD 60# per inch width
CD 35# per inch width


Tear:
MD 145 grams per sheet
CD 145 grams per sheet


Stiffness:
MD 1200 mg
CD 1000 mg

Adhesive:




Type:


Minimum Application Temperature:


Service Temperature Range:


Typical Performance Data:



























Liner:
Fasson® Dry Base Peelable paper is a white super-calendered paper laminated to a low density polyethylene film.



Basis Weight:
N/A


Caliper:
0.0042 inches ± 10%


Tensile:
N/A


Tear:
N/A

Total Construction Caliper (approximate): .0122 inches ± 10%

Note:
Dry Tag is a printable-one-side construction which allows for the clean removal of diecut labels from the liner with no tacky adhesive left on the label or liner. Dry Tag can be used for temporary ID cards, hang tags, etc. The Dry Tag liner is a bleached kraft sheet which can be diecut against by using dies tooled to normal 40# super-calendered liners. The liner can be edge-punched and perforated for fanfolding. The Dry Tag special release system was designed to allow for computer imprinting of the Dry Tag labels without predispensing.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511