Print this Page
Fasson® 3 Mil White MDO/S692N/1.2 Mil Polyester
Spec# 77980
Facestock:
Fasson® 3.0 Mil White MDO is a corona-treated, flexible, opaque white polyolefin with exceptional dimensional stability for use in a wide range of applications, including prime labels. Printable by UV screen, letterpress and flexo, solvent gravure, and water-based flexo inks. The 3.0 Mil White MDO can be diecut and stripped at high speeds on standard web-fed presses, using typical film tooling.



Basis Weight:
n/a


Caliper:
0.0030 ± 7%


Tensile:
MD 19,000 psi
CD 2,500 psi


Tear:
MD 11 grams
CD 110 grams


Stiffness:
n/a
Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion acrylic


Minimum Application Temperature:
+23° F


Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.


HDPE
Loop Tack:
Peel Adhesion:

1.2 - 1.8 lbs
1.1 - 1.7 lbs

PET
Loop Tack:
Peel Adhesion:

3.6 - 4.2 lbs
2.6 - 3.2 lbs

Glass
Loop Tack:
Peel Adhesion:

2.6 - 3.2 lbs
1.6 - 2.2 lbs










Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:
n/a


Caliper:
0.00118 inches ± 10%


Tensile:
MD 32,000 psi
CD 32,000 psi


Tear:
n/a
Total Construction Caliper (approximate): 0.00498 inches ± 10%

"This specification is recognized by the Association of Plastic Recyclers (APR)  for the recycling of HDPE bottles."

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511