DURABLE PORTFOLIO
Product Data Sheet
Fasson® 3 Mil Matte White Synthetic Paper /S8020/40#SCK
Spec#: 79480 - Durable
FacestockFacestock physical properties
3 Mil Matte White Synthetic Paper is a matte finished opaque white polypropylene synthetic material with the look and feel of paper and the moisture-resistance of a film. Suitable for flexographic, letterpress, screen, and thermal transfer printing.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0030
inches
76.20
micron
Tensile:
ASTM D882
MD
15,000
psi
1,055
kg/sq cm
CD
21,000
psi
1,476
kg/sq cm
AdhesiveAdhesive physical properties
S8020 is a clear, permanent acrylic adhesive designed for overlaminating films. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates. Specifically designed to exhibit excellent wetout characteristics, good yellowing resistance, and excellent clarity.
Imperial Value
Units
Metric Value
Units
Type:
Emulsion Acrylic
Caliper:
ASTM D1000
0.0007
inches
17.78
micron
Standard Coat Wt:
19
g/sq m
Minimum Appl Temp:
23
F
-5
C
Service Temp Range:
Min
-40
F
-40
C
Max
300
F
149
C
Loop Tack Stainless
Steel: PSTC11
40.0
oz/inch
44.0
N/100 mm
LinerLiner physical properties
40#SCK is a bleached, calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.
Imperial Value
Units
Metric Value
Units
Caliper:
ASTM D1000
0.0024
inches
0.0000
Basis Wt: TAPPI T410
* (24" x 36" 500 sheets)
41.0
lbs
0.0
g/sq m
Tensile:
ASTM D882
MD
20.0
psi
0.0
CD
10.0
psi
0.0
Tear:
TAPPI T414
MD
45.0
grams
0.0
CD
65.0
grams
0.0
Liner Release:
TMLI 90o removal of Liner from Facestock.		Total Construction Caliper
(approximate):
Rate of Removal
Grams/2" Width
400 inches/min.
35
.0061 inches

DURABLE PORTFOLIO
Product Data Sheet


Features and Benefits


Applications and Uses
Printing and Converting
Can be thermal transfer printed with wax, wax/resin combination, and resin based ribbons on standard thermal transfer printing equipment. The smooth matte surface accepts most flexographic, letterpress, scree and digital inks. Testing is recommended prior to selecting any thermal transfer ribbon or press ink for production. Can be die cut and converted at high speeds on most roll fed rotary printing equipment. Labels in a variety of shapes and sizes have been successfully dispensed on standard pressure sensitive label dispensers.

RoHS 3 (EU 2015/863)
The Fasson® product listed above meets the requirements specified by the European Union Directive Restriction of Hazardous Substances Directive 2002/95/EC, 2011/65/EU (RoHS 2) and as amended by (EU) 2015/863 (RoHS 3) .The heavy metals and phthalates called out in this directive are not intentionally used in the manufacture of Fasson® products and the totallevel of any incidental contamination of said substances in these products would be less than 100 ppm.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Note:
The technical data presented is from tests we believe to be reliable but should be considered representative or typical only and should not be used for specifications purposes. This product should be tested thoroughly under end-use conditions to ensure it meets the requirements of the specific application.


DURABLE PORTFOLIO
Product Data Sheet
Appendix
Performance Data:
The following technical data should be considered representative or typical only and should not be used for specification purposes.


Initial
(15 minute dwell)
72 Hours at Room
Temperature
72 Hours at 1200F
96 Hours at 1500F (650C) &
80% Relative Humidity
Surface
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
oz/in
N/100mm
1. Stainless Steel

2. Aluminum

3. Polypropylene

4. HDPE

5. LDPE

6. ABS Plastic
23.1

35.26

19.5

15.3

12.7

38.7
25.4

38.8

21.5

16.8

14

42.6
68.5

45.9

18.5

17.4

18.5

39.7
75.4

50.5

20.4

19.1

20.4

43.7
56.1

59.1

24.3

17.4

15.1

36.9
61.7

65

26.7

19.1

16.6

40.6
67.5

65.8

10.1

18.1

7.5

17.8
74.3

72.4

11.1

19.9

8.3

19.6

Compliance Recognition: UL
Underwriters Laboratories, Inc.
Minimum Temperature
Maximum Temperature
    Substrates
oF
oC
oF
oC
(I=Indoor Only I/O=Indoor & Outdoor)
    1. Acrylic Paint

    2. Acrylic PCP*

    3. ABS Plastic

    4. Alkyd Enamel Paint

    5. Aluminum

    6. Epoxy Paint

    7. Epoxy PCP*

    8. Galvanized Steel

    9. Glass

    10. Melamine

    11. Nylon (polyamide)

    12. Phenolic

    13. PBT Plastic

    14. Polycarbonate

    15. Polyester Paint

    16. PET Plastic

    17. Polyphenylene Oxide

    18. Polystyrene

    19. Polyurethane Paint

    20. Poly (Urethane) PCP*

    21. PVC (Rigid)

    22. PVF (Tedlar)

    23. Porcelain

    24. Stainless Steel

    25. Unsat Thermoset Polyester

    26. Acrylic Plastic
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40

-40
176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

176

140
80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

80

60
I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I

I
Recognized Ribbons: Armor "AXR7+", DNP "R-510", DNP "TRX-55", Iimak "SP-330", ITW "B324", Ricoh "B110C"





409® is a registered trademark of the Clorox Company
Tide® is a registered trademark of the Procter & Gamble Company


The information on compliance conditions, substrates, and printing products contained in the tables above represent a summary of recognized or acceptable conditions and printing products. Other conditions, substrates, and printing products may be recognized with this material. Please consult the specific compliance organization records or specific files for a complete listing.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.

www.na.fasson.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511