Print this Page
Fasson® 2 Mil Clear BOPP TC/R3500/1.2 Mil Polyester
Spec# 77462
Revised 8.10.20L
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, heat set, biaxially oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks, thermal transfer resin based or wax/resin combination ribbons. Use caution when applying inks out to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink or ribbon selection.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 14,000 psi
CD 32,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® R3500 is a specially formulated acrylic adhesive designed for ease of removability from plastic packaging while maintaining good peel performance. Fasson® R3500 is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.

Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+40° F


Service Temperature Range:
0° F to +200° F
Typical Performance Data: Tested with 2 Mil Clear BOPP


Stainless Steel
Loop Tack:
Peel Adhesion:


0.87 Lbs

PET Flow Wrap
Loop Tack:
Peel Adhesion:


0.90 Lbs















Liner:
Fasson® 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.



Basis Weight:



Caliper:
0.0012 inches ± 10%


Tensile:
MD 31,000 psi
CD 36,000 psi


Tear:
N/A
Total Construction Caliper (approximate): 0.00400 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511