Print this Page
Fasson® 60# Semi-Gloss EliteTM/S490A/2 Mil Polystyrene/S490A/44#PK - Piggyback
Spec# 15483 -POLYSTYRENE OBSOLETE 2/2018
Facestock:

Fasson® 60# Semi-Gloss EliteTM is a bright, blue-white, 60# C1S, super calendered paper. It is designed to bridge the gap between low- and high-end process printing, up to 175 line screen. This sheet prints well with water-based Flexo, UV Flexo, and UV Letterpress inks. It has improved smoothness while maintaining strength for good converting and dispensing.


Basis Weight:
58.5# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0031 inches ± 10%


Tensile:
MD 32# per inch width
CD 16# per inch width


Tear:
MD 47 grams per sheet
CD 55 grams per sheet


Stiffness:
MD 110 mg
CD 60 mg
Adhesive:
Fasson® S490 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Displays excellent diecutting and stripping characteristics, especially on wide-web applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

4.0 lbs
2.0 lbs - tear

Treated HDPE
Loop Tack:
Peel Adhesion:

3.4 lbs
1.8 lbs - tear

Polypropylene
Loop Tack:
Peel Adhesion:

3.0 lbs
1.5 lbs - tear

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs
1.3 lbs - tear

Glass
Loop Tack:
Peel Adhesion:

3.7 lbs
2.5 lbs - tear
Liner:
Fasson® 2 Mil Super Clear Polystyrene is a versatile thermoplastic resin available in a wide range of formulations. Film stiffness allows for easy converting and dispensing.



Basis Weight:
N/A


Caliper:
0.0020 inches ± 10%


Tensile:
MD 10,500 psi
CD 10,500 psi


Tear:
N/A
Adhesive:
Fasson® S490 is a general purpose permanent adhesive with good adhesion to many substrates, particularly corrugated cardboard. Displays excellent diecutting and stripping characteristics, especially on wide-web applications.

FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion Acrylic


Minimum Application Temperature:
+25° F


Service Temperature Range:
-65° F to +200° F
Typical Performance Data: , 50# Uncoated Paper at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

4.0 lbs
2.0 lbs - tear

Treated HDPE
Loop Tack:
Peel Adhesion:

3.4 lbs
1.8 lbs - tear

Polypropylene
Loop Tack:
Peel Adhesion:

3.0 lbs
1.5 lbs - tear

Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.9 lbs
1.3 lbs - tear

Glass
Loop Tack:
Peel Adhesion:

3.7 lbs
2.5 lbs - tear
Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. NOTE: Liner color variation may occur.



Basis Weight:
43.50# per ream ±10%
(24" x 36" 500 sheets)


Caliper:
0.0031 inches ± 10%


Tensile:
MD 35 pounds per inch width
CD 13 pounds per inch width


Tear:
MD 35 grams
CD 50 grams
Total Construction Caliper (approximate): 0.0098 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511