Print this Page
Fasson® 60# Matte Coated Paper WN ITC (Indigo Top Coat)/S100R/44#PK
Spec#
19961
Facestock:
Fasson® 60# Matte Coated Paper WN ITC (Indigo Top Coat) is a white coated sixty pound paper that features a dull matte finish. This paper was designed exclusively for the wine market through its unique processing. The surface has been optimized for printing pressure sensitive labels on HP Indigo® ws4000, ws4050, ws4500, and ws6000 digital color presses. This Indigo topcoated (ITC) paper has a 1 year shelf life.
Basis Weight:
60.8# per ream ± 10%
(500 sheets 25" x 38")
Caliper:
0.0034 inches ± 10%
Tensile:
MD 30.0# per inch width
CD 16.6# per inch width
Tear:
MD 61.8 grams per sheet
CD 62.8 grams per sheet
Stiffness:
MD 129 mg
CD 76 mg
Adhesive:
Fasson® S100R is a permanent adhesive which is removable in minimum 100° F water. Developed with good initial tack and ultimate adhesion, S100R can be used as a permanent adhesive on many substrates, yet be removed from that substrate after immersion in water hotter than 100° F. Removal times will vary due to differences in facestocks and substrates. It might be as short as 30 seconds from HDPE, or as long as 5 minutes. Where removal is required, this adhesive is recommended for use on HDPE, polypropylene, poly vinyl chloride (PVC), polyester, Lexan®, stainless steel, and glass. We do not recommend it for use with film facestocks (i.e., polypropylene, polystyrene), due to a potential surface interaction which could cause the loss of water removability. This adhesive exhibits excellent diecutting and stripping properties.
FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.
Lexan® is a registered trademark of General Electric Company.
Type:
Emulsion Acrylic
Minimum Application Temperature:
+20° F
Service Temperature Range:
-65° F to 200° F
Typical Performance Data:
60# C1S Paper at room temperature on standard lab panels
Stainless Steel
Loop Tack:
Peel Adhesion:
2.6 lbs
1.8 lbs - Tear
HDPE
Loop Tack:
Peel Adhesion:
1.6 lbs
1.1 - 1.6 lbs
PET
Loop Tack:
Peel Adhesion:
2.6 lbs
1.2 lbs -Tear
Glass
Loop Tack:
Peel Adhesion:
2.7 lbs
1.9 lbs -Tear
Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. Features good back printability.
Basis Weight:
43.5# per ream ±10%
(500 sheets 24" x 36")
Caliper:
0.0031 inches ± 10%
Tensile:
MD 35# per inch width
CD 20# per inch width
Tear:
MD 35 grams
CD 50 grams
Total Construction Caliper
(approximate):
0.0073 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511