Print this Page
Fasson® 2 Mil Clear BOPP TC/S692N/1.2 Mil Polyester
Spec#
77138 - DO NOT USE TC1000
Facestock:
Fasson® 2 Mil Clear BOPP TC is a topcoated, biaxially-oriented, co-extruded polypropylene film with excellent clarity. The surface has been modified for improved ink adhesion. This product has excellent moisture resistance and good diecutting and dispensing characteristics. Printable by many web screen, UV letterpress, flexographic solvent and water-based inks. Not recommended for thermal transfer printing.
Use caution when applying inks to the edge of the label, particularly UV screen inks and UV cured varnishes. High shrinkage coatings can cause labels to lift off the liner or substrate. In-house testing is always recommended prior to final ink selection.
Basis Weight:
N/A
Caliper:
0.00197 inches ± 10%
Tensile:
MD 20,580 psi
CD 39,250 psi
Tear:
N/A
Stiffness:
N/A
Adhesive:
Fasson® S692N is a clear general purpose permanent acrylic adhesive. It exhibits a balance of high cohesive strength and adhesion to low surface-energy substrates for lasting performance on squeezable containers. Specifically designed to exhibit excellent wetout characteristics and short-term removability. Meets the requirements of FDA 21 CFR 175.105 for indirect food contact. This section covers applications where incidental contact between food and adhesive could occur.
Type:
Emulsion acrylic
Minimum Application Temperature:
+23° F
Service Temperature Range:
-20° F to +200° F subject to facestock limitations
Typical Performance Data:
2 Mil Clear Polypropylene facestock at room temperature on standard lab panels.
HDPE
Loop Tack:
Peel Adhesion:
1.2 - 1.8 lbs
1.1 - 1.7 lbs
PET
Loop Tack:
Peel Adhesion:
3.6 - 4.2 lbs
2.6 - 3.2 lbs
Glass
Loop Tack:
Peel Adhesion:
2.6 - 3.2 lbs
1.6 - 2.2 lbs
Liner:
A 1.2 mil durable polyester liner suitable for high-speed diecutting and stripping applications. Used primarily for roll-to-roll, high-speed dispensing applications.
Basis Weight:
N/A
Caliper:
0.00116 inches ± 10%
Tensile:
MD 32,000 psi
CD 32,000 psi
Tear:
N/A
Total Construction Caliper
(approximate):
0.00396 inches ± 10%
Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH
Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.
Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.
label.averydennison.com
Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511