Print this Page
Fasson® TransCode®/FDA815SB/50#SCK ABC
Spec# 72981
Facestock:
Fasson® TransCode® is a white polyolefin thermal transfer printable film specially engineered to be receptive to a variety of thermal transfer ribbons. Suitable for indoor or outdoor use. This product can be diecut and stripped at high speeds on standard web-fed presses.



Basis Weight:
N/A


Caliper:
0.0040 inches ± 10%


Tensile:
MD 20,000 psi
CD 31,000 psi


Tear:
N/A


Stiffness:
N/A
Adhesive:
Fasson® FDA815S is a clear adhesive featuring good initial tack, moderate shear, minimum cold flow, and the ability to adhere to a wide variety of substrates.

FDA Compliance:
- Meets the requirements of 16CFR 1500.41 for direct skin contact.
- Meets the requirements of Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Solvent Acrylic


Minimum Application Temperature:
+50° F


Service Temperature Range:
-40° F to +200° F subject to facestock limitations
Typical Performance Data: Tested with 2 Mil Clear Polyester at room temperature on standard lab panels.


Stainless Steel
Loop Tack:
Peel Adhesion:

1.6 lbs
3.8 lbs

Aluminum
Loop Tack:
Peel Adhesion:

N/A
3.4 lbs

Polypropylene
Loop Tack:
Peel Adhesion:

N/A
2.1 lbs

HDPE
Loop Tack:
Peel Adhesion:

N/A
1.0 lbs

ABS Plastic
Loop Tack:
Peel Adhesion:

N/A
3.9 lbs
Liner:
Fasson® 50#SCK is a bleached super-calendered kraft stock featuring high internal strength, toughness, and tear resistance. Ideally suited for marginal punching, perforating, and fanfolding.



Basis Weight:
57.7# per ream ± 10%
(500 sheets 24" x 36")


Caliper:
0.0032 inches ± 10%


Tensile:
MD 51.40# per inch width
CD 22.80# per inch width


Tear:
MD 55.10 grams
CD 71.40 grams
Total Construction Caliper (approximate): 0.0080 inches ±10%

FDA815SB - The "B" indicates a heavy adhesive coat weight. This construction is supplied with an Anti Block Coating ("ABC") on the backside of the liner to control adhesive and label transfer to the backside of the liner in finished, wound rolls. This liner should not be used in fanfolded label applications and is not recommended for back printability.

Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511