Print this Page
Fasson® IF ("Inverted Face") Metallized PRIMAX® 250/S1000/44#PK
Spec# 75312-REV 5/2024L
Facestock:
Fasson® Metallized PRIMAX® 250 is a corona treated, flexible, metallized polyolefin film with exceptional dimensional stability for use in a wide range of applications, including prime labeling. The metallized coating is applied to the nonprint side of the film in order to offer a film with a block-out feature.



Basis Weight:
n/a


Caliper:
.0025 inches ± 10%


Tensile:
MD 17,500 psi
CD 2,400 psi


Tear:
MD 9.00 grms
CD 107 grms


Stiffness:
n/a
Adhesive:
Fasson® S1000 is a clear permanent adhesive specifically designed to exhibit excellent wet-out characteristics on clear films. Frequently used in the prime label market where squeezability and clear labeling are critical. Meets the requirements of FDA Compliance: Title 21, Section 175.105 of the Code of Federal Regulations (21 CFR 175.105). Compliance to this regulation permits the use of this adhesive in applications for which the adhesive either (1) is separated from the food by a functional barrier, which will prevent the migration of any of the adhesive components to the food, or (2) has incidental contact with food limited to the trace amount at the seams or the edges of the label.



Type:
Emulsion acrylic


Minimum Application Temperature:
+10° F


Service Temperature Range:
-40° F to +200° F, subject to facestock limitations
Typical Performance Data: 2 Mil Clear Polyester facestock at room temperature on standard lab panels


Stainless Steel
Loop Tack:
Peel Adhesion:

3.2 - 3.6 lbs
1.9 - 2.3 lbs

HDPE
Loop Tack:
Peel Adhesion:

1.0 - 1.5 lbs
0.8 - 1.3 lbs

Glass
Loop Tack:
Peel Adhesion:

2.8 - 3.3 lbs
2.0 - 2.3 lbs










Liner:
44#PK is a poly-coated natural kraft (brown) paper liner for roll-to-roll applications. Specially designed for high-speed automatic label dispensing applications. Not recommended for sheeting or fanfolding. NOTE: Liner color variation may occur.



Basis Weight:
43# per ream +/- 10%
(500 sheets 24"x36")


Caliper:
0.00320 inches +/- 10%


Tensile:
MD 28.5# per inch width
CD 16# per inch width


Tear:
n/a
Total Construction Caliper (approximate): 0.0065 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511