Print this Page
Fasson® Matte Litho FasCoverTM 2/AT20/40#SCK
Spec# 06263
Facestock:
Fasson® Matte Litho FasCover™ 2 is a matte litho facestock with a black, opaque barrier coating for use as a correction label stock. Good printing with screen, solvent and water-based flexo ink systems. Fair letterpress printing with UV ink systems. Not recommended for offset printing. This facestock can be imprinted.



Basis Weight:
60# per ream ± 10%
(500 sheets 25" x 38")


Caliper:
0.0036 inches ± 10%


Tensile:
MD 32# per inch width
CD 17# per inch width


Tear:
MD 60 grams per sheet
CD 64 grams per sheet


Stiffness:
MD 170 mg
CD 90 mg

Adhesive:
Fasson® AT20M is an all-temperature adhesive developed to provide good room temperature performance and excellent cold temperature performance without sacrificing good diecutting and stripping properties. Because of its cold-temperature properties and good adhesion to corrugated cardboard, AT20M is an ideal adhesive for warehouse applications. Fasson® AT20M is suitable for applications where compliance with FDA 175.105 is required. This section covers applications where incidental contact between food and adhesive could occur.



Type:
Emulsion Acrylic


Minimum Application Temperature:
-20° F


Service Temperature Range:
-65° F to +200° F


Typical Performance Data: Tested with 60# C1S Paper at room temperature on standard lab panels.



Stainless Steel
Loop Tack:
Peel Adhesion:

2.7 lbs
2.2-3.0 lbs


Treated HDPE
Loop Tack:
Peel Adhesion:

2.4 lbs
1.1-2.1 lbs


Polypropylene
Loop Tack:
Peel Adhesion:

2.9 lbs
1.8-2.4 lbs


Recycled Corrugated
Loop Tack:
Peel Adhesion:

1.6 lbs
1.1-2.1 lbs-Pulled Fiber


Glass
Loop Tack:
Peel Adhesion:

2.9 lbs
1.1-2.0 lbs

Liner:
40#SCK is a bleached super calendered kraft stock featuring high internal strength, toughness, and tear resistance. Used primarily for roll-to-roll label applications.



Basis Weight:
39.90# per ream ± 10%
(24" X 36" 500 sheets)


Caliper:
0.00236 inches ± 10%


Tensile:
MD 38.30# per inch width
CD 14.80# per inch width


Tear:
MD 32.60 grams
CD 40.80 grams

Total Construction Caliper (approximate): 0.0064 inches ± 10%



Optimal Storage Conditions
Unless otherwise specified in this document, ideally store at 72F and 50% RH

Statement of Practical Use
All materials, sales and contracts for sale of Avery Dennison products are sold with the express requirement and understanding that the customer is solely and exclusively responsible for testing and for ensuring the products are fit for the customer's purposes or an end-user's purposes. All express or implied warranties of merchantability and fitness for particular use are disclaimed.

Warranty
All sales and contracts for sale are expressly conditioned on the buyer’s assent to Avery Dennison’s terms and conditions found on its website at label.averydennison.com/products. Avery Dennison hereby objects to any term, different from or additional to Avery Dennison’s terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Avery Dennison.


label.averydennison.com

Label and Packaging Materials-North America
8080 Norton Parkway
Mentor, OH 44060
800-944-8511